Material Data Sheet S.C.A.T. SafetyCaps 2.0 Product Group SafetyCaps for HPLC solvent supply, Generation 2.0 Intended use / basic function Blocking solvent vapours during solvent supply to HPLC / UHPLC instruments, prevention of contamination and underpressure. Max. flow rate (air valve) ≦ 400 ml / min (suitable for preparative applications) Pore size (air valve) Tubing connector type One-piece fitting with integrated ferrule Tubing connector sizes 1.6 / 2.3 / 3.2 / 4.76 / 6.35 mm OD tubing (depending on model) Number of tubing connectors 1 / 2 / 3 / 4 / 6 (depending on model) Body: PTFE premium grade - medical grade Test method Specific gravity Water absorption Tensile strength Ball hardness Compression strength at 1% deformation Deformation under load (140 kg/cm2 for 24 hrs. at 23° C) Permanent deformation (after 24 hrs. relaxation at 23° C) Coefficient of static friction Coefficient of dynamic friction Wear coefficient Thermal conductivity Coefficient of linear therman expansion from 25 to 100 ° C Dielectric strength Volume resistivity Surface resistivity Address S.C.A.T. Europe GmbH Waldecker Straße 7 64546 Mörfelden-Walldorf Germany Bank Account Bank: Frankfurter Volksbank I.B.A.N.: DE 0550 1900 0060 0151 1678 B.I.C.: FF VB DE FF BLZ: 501 900 00 No.: 6101 539 146 Legal Information Registered Office: 64546 MЃrfelden-Walldorf District Court: Darmstadt Comm. Register: HRB 55045 Managing Director: Peter Rebehn V

Material Data Sheet S.C.A.T. SafetyCaps Statement on suitability for contact with foodstuff Code of federal regulation 21 CFR Ch.1; section 177. 1550 Perfourocarbon Resins of the Food and Drug Administration/US. EU Regulation EU 1935/2004 - 10/2011 on plastic materials and articles to come in contact with food. Test method E-Module (bending test) Bending strength Strain of the outer fibre (maximum load) E-Module (tension test) Breaking resistance (tension test) Breaking elongation (tension test) Izod impact resistance 1U Yellow card available Valve Housing: Polypropylene (PP) Test method Melt...

Material Data Sheet S.C.A.T. SafetyCaps Valve Membrane: PTFE, virginal, porous Ӣ" Symmetric, porous structure • Hydrophobic on both sides Material characteristics • Free of PFOA • Free of heavy metals • Free of animal substances Pore size Typical water inlet pressure (WIP) Temperature resistance Chemical resistance Almost universal • Protection class IP68 • ISO 16750-5:2010 • Directive 2000/53/EG • Directive 10/2011/EG on plastic materials and articles to come in contact with food (Implementation in Germany by BedGgstV), supplemented by directives 2011/8/EG, 2007/19/ EG and 2002/72/EG • Directive...

Material Data Sheet S.C.A.T. SafetyCaps Ultimate elongation: 250 ° C Flexural modulus: 23 ° C MIT folding endurance (0,20 mm, 8 mil film) Hardness durometer Dielectric strength, short time, 0,25 mm (0,010 in) Volume resistivity Weather and chemical resistance Limiting oxygen index Continuous service temperature ASTM D 257 / ISO 1325 ASTM D 570 ASTM D 2863 / ISO 4589 UL 94 Test method Tensile strength Address S.C.A.T. Europe GmbH Waldecker StraЃe 7 64546 M߃rfelden-Walldorf Germany Bank Account Bank: Frankfurter Volksbank I.B.A.N.: DE 0550 1900 0060 0151 1678 B.I.C.: FF VB DE FF BLZ: 501 900 00...