7 Technology ScanWill intensifiers are based on a piston principle, where a larger diameter piston pushes a smaller diameter piston, thus increasing the pressure to a factor equal to the ratio: Larger diameter area divided by smaller diameter area. ScanWill - More Pressure. More Power ScanWill’s compact hydraulic pressure intensifiers offer an easy, energy-saving, safe and cost-efficient solution to achieving a higher output pressure from an existing low-pressure power source. The outlet pressure will always be proportionate to the supplied pressure. The diagram shows the basic principle of the...

MultiPlier Small is a compact all-round in-line hydraulic pressure intensifier for use in limited space. Features: • In-line pressure intensifier • End pressure range: 20 - 800 bar / 290 - 11,600 psi • Multiple intensification ratios available • Reciprocating - continuously delivers flow during pressure build-up • All high-pressure valves are integrated Technical Specifications Ratio

MultiPlier Tube is an all-round in-line hydraulic pressure intensifier for tube connections. Features: • In-line pressure intensifier • End pressure range: 20 - 800 bar / 290 - 11,600 psi • Multiple intensification ratios available • Reciprocating - continuously delivers flow during pressure build-up • All high-pressure valves are integrated Technical Specifications Ratio 47,5 2 off M4x6 for mounting on both sides

MultiPlier Medium is an in-line hydraulic pressure intensifier for medium size hydraulic systems. Features: • In-line pressure intensifier • End pressure range: 20 - 800 bar / 290 - 11,600 psi • Multiple intensification ratios available • Reciprocating - continuously delivers flow during pressure build-up • All high-pressure valves are integrated – including a P.O. check Valve POV Technical Specifications Ratio

MultiPlier Large is an in-line hydraulic pressure intensifier for large-sized hydraulic systems. Features: • In-line pressure intensifier • End pressure range: 20 - 800 bar / 290 - 11,600 psi • Multiple intensification ratios available • Reciprocating - continuously delivers flow during pressure build-up • All high-pressure valves are integrated – including a P.O. check Valve POV Technical Specifications Ratio

MultiPlier Flange is a hydraulic pressure intensifier for flange-on mounting. Features: • Flange-on pressure intensifier • End pressure range: 20 - 700 bar / 290 - 10,150 psi • Multiple intensification ratios available • Reciprocating - continuously delivers flow during pressure build-up • All high-pressure valves are integrated – including a P.O. check Valve POV Technical Specifications Ratio

MultiPlier Cetop/NG6 is a hydraulic pressure intensifier for Cetop/NG6 mounting. Features: • Cetop DO3 / NG6 pressure intensifier • End pressure range: 20 - 500 bar / 290 - 7,250 psi • Multiple intensification ratios available • Reciprocating - continuously delivers flow during pressure build-up • All high-pressure valves are integrated – including a P.O. check Valve POV Technical Specifications Ratio (i)

MultiPlier 2000 is a hydraulic pressure intensifier for high-pressure power packs up to 3,000 bar / 43,500 psi. Features: • In-line pressure intensifier • End pressure range: 800 - 3,000 bar / 11,600 - 43,500 psi • Multiple intensification ratios available • Reciprocating - continuously delivers flow during pressure build-up • All high-pressure valves are integrated • Selection of top plates for high pressure connection available Technical Specifications Ratio For mounting 2 x M4 on both sides The HP-Connection and D depend on the top Plate chosen

The MultiPlier 1400/2000/4000 models are hydraulic pressure intensifiers for high flow and high pressure. Features: • In-line pressure intensifiers • End pressure range: 800 - 4,000 bar / 11,600 - 58,000 psi • Reciprocating - continuously delivers flow during pressure build-up • Multiple intensification ratios available • All high-pressure valves are integrated • Selection of top plates for high pressure connection available 61 HP-Connection and D depend on the top plate chosen The HP-Connection and D depends on the top plate chosen.

SPECIAL SOLUTIONS MP-CT MultiPlier CT is a hydraulic pressure intensifier for Cetop/NG6 mountings with separate high-pressure ports. A hydraulic mini power pack can also be added when a higher end pressure is required. SIS-34 is a ScanWill intensifier solution for use in hydraulic systems where higher pressure is needed, locally. The SIS-series is design protected. Features: • Cetop DO3 / NG6 pressure intensifier • End pressure range: 20 - 800 bar / 290 - 11,600 psi • Multiple intensification ratios available • Reciprocating - continuously delivers flow during pressure build-up • All high-pressure...

ScanWill has more than 25 years of production knowledge and application experience. ScanWill’s entire product range is always in stock for day-to-day shipment from the facilities in Albertslund, Denmark. Check out our website: www.scanwill.com Contact us: ScanWill Fluid Power ApS Roholmsvej 10L Albertslund DK-2620 Denmark Telephone: +45 74 42 34 50 Fax: +45 74 42 34 30 Email: [email protected] ScanWill has a network of more than 40 Sales Partners around the world providing technical assistance and swift customer service.