Catalogs >
SCANLAB GmbH >
Scan System "powerSCAN"

Scan System "powerSCAN"
4Pages

Catalog excerpts

powerSCA/V, powerSCA/Vi maximum-power laser scanning The scan systems of the powerSCAN series enable positioning multiple kilowatts of laser power onto a workpiece in just a few milliseconds. In combination with a vario5C4/V, the laser beam can be dynamically focused within working volumes, thus allowing non-flat workpieces to be processed. Apertures from 33 mm up to 70 mm allow small spot sizes and therefore high power densities even with large working distances. The XY mirrors and the varioSC4A/'s optics are air cooled, while the scanners, electronics and varioSCAN are water cooled. This ensures reliable operation with excellent long-term stability - even under challenging environmental conditions and with high laser Each axis of the power SCAN 50, 50i, 70 and 70i is individually implemented as a sealed submodule - a calibrated and tuned unit containing a galvanometer scanner with a mirror and the scanner's drive electronics. Thus, rapid replacement of individual axes is en- sured. Located in a separate sealed base module, the modularly- designed main electronics provide functions such as a digital interface and a power management system with comprehensive The powerSCAN i-series of scan systems employs the same ¡DRIVE® electronic concept used in the success-proven intelli5G4/V®. This brings improved dynamics and advanced querying possibilities. The series includes both the power SCAN 50i and powerSC4A/70i. Typical applications: Laser processing of materials • Rapid manufacturing

Open the catalog to page 1

2 Entrance aperture (water-cooled) 4 Clamping block (water-cooled) W Connectors for cooling water Beam entrance side Beam exit side SCANLAB precisely optimizes and tunes all optical components to one another to ensure maximum focus quality and stable process parameters. laser beam. Numerous optical configurations - specially ous wavelengths, laser powers and image fields or working volumes. Customers can easily self-install these ex- changeable varioSC/W optics sets to adapt the scan system for their applications. via a SCANLAB RTC® control board. This facilitates straight-forward...

Open the catalog to page 2

powerSGW 50 and powerSGW 70 scan systems may be equipped with interfaces for electrical or optical data transfer. tems are controlled via the SL2-100 inter- with an additional reference sensor system for automatic self-calibration for applications requiring extremely high long-term stability with sensors for monitoring the cooling • Beryllium mirrors are optionally available for maximized dynamic performance vantages of the ¡DRIVE® technology: high flexibility, high dynamic and real- time querying of the actual position and other status data 2 Entrance aperture (water-cooled) 4 Clamping...

Open the catalog to page 3

powerSCAN, powerSCAN i Typical Optical Configurations powerSCAN 33 with varioSCAN 40 powerSCAN 50/50i with varioSCAN 60/varioSCANde 60i Wavelength 10.6 µm 10.6 µm 10.6 µm 10.6 µm 10.6 µm 10.6 µm 10.6 µm Max. laser power cw Max. laser power for 50% duty cycle Image field size 2000 W 4000 W 2000 W 4000 W 2000 W 4000 W 2000 W 4000 W 2000 W 4000 W 2000 W 4000 W 2000 W 4000 W (170 x 170) mm2 (500 x 500) mm2 (1.5 x 1.5) m2 (400 x 400) mm2 (600 x 600) mm2 (800 x 800) mm2 (1.0 x 1.0) m2 Typical processing speed 0.8 m/s 2.0 m/s 6.0 m/s 1.3 m/s 2.0 m/s 2.7 m/s 3.2 m/s Focus range in z direction ±4 mm...

Open the catalog to page 4