maximum-power laser scanning The scan systems of the powerSCAN series enable positioning multiple kilowatts of laser power onto a workpiece in just a few milliseconds. In combination with a varioSCAN, the laser beam can be dynamically focused within working volumes, thus allowing non-flat workpieces to be processed. Apertures from 33 mm up to 70 mm allow small spot sizes and therefore high power densities even with large working distances. The XY mirrors and the varioSCAN's optics are air cooled, while the scanners, electronics and varioSCAN are water cooled. This ensures reliable operation with excellent long-term stability - even under challenging environmental conditions and with high laser powers. Each axis of the powerSCAN 50, 50i, 70 and 70i is individually implemented as a sealed submodule - a calibrated and tuned unit containing a galvanometer scanner with a mirror and the scanner's drive electronics. Thus, rapid replacement of individual axes is ensured. Located in a separate sealed base module, the modularly-designed main electronics provide functions such as a digital interface and a power management system with comprehensive monitoring functions. The powerSCAN i-series of scan systems employs the same iDRIVE electronic concept used in the success-proven intelliSCAN. This brings improved dynamics and advanced querying possibilities. The series includes both the powerSCAN 50i and powerSCAN 70i. Typical Applications: • Laser processing of materials • Rapid manufacturing • 3D applications • Processing-on-the-fly

SCANLAB precisely optimizes and tunes all optical components to one another to ensure maximum focus quality and stable process parameters. The powerSCAN can be equipped with a varioSCAN for dynamically focusing the laser beam. Numerous optical configurations – specially developed for the varioSCAN and matched to the powerSCAN – are available for various wavelengths, laser powers and image fields or working volumes. Legend 1 powerSCAN 33 2 varioSCAN 40 3 Beam in 4 Entrance aperture (water-cooled) 5 Clamping block (water-cooled) 6 Base plate 7 Beam out 8 Galvanometer scanner E Electrical connectors...

powerSCAN 50 and powerSCAN 70 scan systems may be equipped with interfaces for electrical or optical data transfer. powerSCAN 50i and powerSCAN 70i systems are controlled via the SL2-100 interface. • powerSCAN systems can be equipped with an additional reference sensor system for automatic self-calibration for applications requiring extremely high long-term stability Beam entrance side Beam exit side 323.9 309.52 • powerSCAN  50i and  70i afford all advantages of the iDRIVE technology: high flexibility, high dynamic and realtime querying of the actual position and other status data Legend 1 powerSCAN...

Beam expansion factor 2.5 2.4 2.2 3.8 3.6 3.5 3.4 duty cycle Image field size (440 x 440) mm2 (1.0 x 1.0) m2 (1.6 x 1.6) m2 Typical processing speed 0.9 m/s 2.0 m/s 3.2 m/s Focus range in z direction ±10 mm ±75 mm ±200 mm Beam expansion factor 4.9 4.5 4.6 Type-Dependent Specifications (all angles are in optical degrees) powerSCAN 33powerSCAN 50/50i powerSCAN70/70i Beam displacement45.21 mm72.72 mm98.2 mm Step response time (settling to 1/1000 of full scale) 1% of full scale 1.3 ms 1.5 ms / 2.0 ms (1) 2.8 ms / 3.5 ms (1) 10%...