system components for integrators ® dynAXIS  galvanometer scanners are high-performance rotary motors for optical applications. They consist of a motor section based on moving magnet technology and a high-precision position detector. The primary area of application is the fast and precise positioning of mirrors for the deflection of laser beams. ® The exceptional dynamics of SCANLAB’s dynAXIS  scanners are the result of years of experience in developing and manufacturing scanners, scan systems and scan solutions for industrial use. ® The motor section of each dynAXIS  is ideally matched to the deflection mirror´s inertial load. The optimized rotor design is largely responsible for the favorable dynamic properties and resonance characteristics. Axially pre-loaded precision ball bearings guarantee a backlash-free rotor assembly with high stiffness and low friction. Special attention has been paid to long bearing lifetimes. The optical position detector system is characterized by high resolution, as well as good repeatability and drift values. The scanners are equipped with heaters and temperature sensors (except dynAXIS ® XS and dynAXIS ® T). This allows temperature stabilization for further enhancing long-term stability, even under fluctuating ambient conditions. The new scanners of the dynAXIS ® 3 series feature a revised position detector for exceptionally low drift, highest linearity and, optionally, extended deflection angles. For all dynAXIS ® scanners, SCANLAB provides suitable mirrors and mirror coatings for all common laser wavelengths and power levels. In addition to excellent reflection properties, the mirrors are also optimized with respect to inertial load, stiffness and flatness. The high quality of SCANLAB’s galvanometer scanners enables errorfree operation in long-term and continuous use. Comprehensive measurements on custom test benches assure that the highest level of quality is continuously maintained.

dynAXIS ®, dynAXIS ® 3 Mounting A rotation-symmetric flange facilitates mounting of the galvanometer scanner. When mounting, ensure that the galvanometer housing is electrically insulated from the machine assembly. Mirror stoppers are already integrated in the scanners. Mirrors are directly bonded to the galvanometer´s shaft. The mirrors of the dynAXIS ® M and dynAXIS ® L are attached via a mirror mount to the shaft. Type-Dependent Specifications (with SCANLAB control board, all angles are in mechanical degrees) Maximum scan angle Position detector Nonlinearity (7) Offset drift Gain drift Repeatability...