Scania power generation gas engines The Scania lean-burn gas engines work according to the Otto principle, with spark ignition. The engine can be used for both natural gas and high CO2 content biogas, and is equipped with low pressure gas system, and air-to air charge air cooler for high efficiency and no need for compressed gas. Thanks to Scania's modular system, the gas-fuelled engine shares many components with the diesel V8 engine, making the engines both efficient and simple to maintain and repair. The engine can be handled by Scania standard diagnostic tool. Our gas engines produce best in class specific power and all are characterised by high performance, excellent fuel efficiency, lower carbon emissions and low noise levels. The engine can suit a variety of installations, but main purpose is COP for electric production. PRP - Prime power: For continuous operation at varying load. Max mean load factor of 70% of rated power over 24 h of operation. COP - Continuous power: For continuous operation at a constant load for an unlimited number of hours per year. Standard equipment • Engine Management System, OCE1 EMS • Zero pressure gas feed regulator • Gas mixer • Turbocharger • Oil filter, full flow • Centrifugal oil cleaner • Oil cooler, integrated in block • Oil filler, in block • Deep front oil sump • Oil dipstick, in block • Magnetic drain plug for oil draining • Starter, 1-pole 7.0 kW (EMS controlled) • Alternator, 1-pole 100 A (EMS controlled) • Flywheel, SAE 14 • Silumin flywheel housing, SAE 1 flange • Front-mounted engine brackets • Air cleaner, mounted on engine • Pusher fan, diameter 965 mm • Cooling package and radiator 1.5 m2 incl. fan cover, expansion tank and fan and belt protection • Coolant level monitor • Closed crankcase ventilation • Operator's manual Optional equipment • Side-mounted PTO • Exhaust connections • Engine heater • Stiff rubber engine suspension • Studs in flywheel housing • Cast iron flywheel housing • Ramp start delay • Ramp up rate • Oil level sensor This specification may be revised wit

SCANIA POWER GENERATION GAS ENGINES OC16 071A. 333-372 kW (364-409 kVA) Fuel optimised Engine description 90º V8 Working principle Firing order Compression ratio High position alloy steel Aluminium pistons Connection rods I-section press forgings of alloy steel Alloy steel with hardened and polished bearing surfaces Electrical system Fuel type Edition 03 © Scania CV AB, SE-151 87 Södertälje, Sweden