DI16 070M
2Pages

Catalog excerpts

SCANIA MARINE ENGINES The marine engines from Scania are based on a robust design with a strength optimised cylinder block containing wet cylinder liners that can easily be exchanged. Individual cylinder heads with 4 valves per cylinder promotes repairability and fuel economy. The engines are type approved in all major classification societies. The engine is equipped with a Scania developed Engine Management System, EMS, in order to ensure the control of all aspects related to engine performance. The injection system is based on electronically controlled unit injectors that gives low exhaust emissions with good fuel economy and a high torque already at low revs. The engine can be fitted with many accessories such as air cleaners, PTOs, transmissions and type approved instrumentation in order to suit a variety of installations. Standard equipment • Scania Engine Management System, EMS • Unit injectors, PDE • Twin turbochargers, heat insulated • Fuel pre-filter with water separator • Fuel filter • Oil filter, full flow • Centrifugal oil cleaner • Oil cooler, integrated in block • Oil filler, in valve cover • Deep front oil sump • Oil dipstick, front • Starter, 2-pole 7.0 kW • Alternator, 2-pole 100A • Flywheel SAE 14 • Silumin flywheel housing, SAE 1 flange • Front-mounted engine brackets • Catwalk and cover for belt transmission • Closed crankcase ventilation • Sea water charge air cooler • Sea water pump • Dual heat exchangers with expansion tanks • Operator's manual Optional equipment • Electrical base system • Accelerator position sensor • Control panel • Instrument panel • Scania EMS display • Hydraulic pump • Side-mounted PTO • Front-mounted PTO • Exhaust connections • Engine heater • Power pack engine brackets • Stiff rubber suspension • Air cleaner • Studs in flywheel housing • Reversible fuel filter • Low coolant level reaction • Variable idle speed setting • Low oil sump • Oil draining with pump • Oil level sensor • Bilge pump ICFN - Continuous service: Rated power available 1 h/1 h. Unlimited h/year service time at a total load factor of 100%. This specific

Open the catalog to page 1

SCANIA MARINE engines DI16 070M. 405 kW (550 hp) IMO Tier II, US Tier 2, EU Stage IIIA Output Engine description No of cylinders Working principle Firing order Compression ratio High position alloy steel Steel pistons Connection rods I-section press forgings of alloy steel Alloy steel with hardened and polished bearing surfaces Electrical system 140 (g/kWh) Spec fuel consumption 800 1000 160 Propeller curve, assumed exponent 2.5 (l/h) 220 Full load curve 140 200 800 (g/kWh) 1000 1200 1400 1600 180 Propeller curve, assumed exponent 2.5 160 Full load curve (l/h) 140 Propeller curve, assumed...

Open the catalog to page 2