DC971A_248-273kW
2Pages

{{requestButtons}}

Catalog excerpts

DC971A_248-273kW - 1

SCANIA POWER GENERATION engines DC09 071A. 248-273 kW (275-300 kVA) EU Stage IIIA The engines for power generation from Scania are based on a robust design with a strength optimised cylinder block containing wet cylinder liners that can easily be exchanged. Individual cylinder heads with 4 valves per cylinder promotes repairability and fuel economy.   The engine is equipped with a Scania developed Engine Management System, EMS, in order to ensure the control of all aspects related to engine performance. The injection system is based on electronically controlled unit injectors that gives low exhaust emissions with good fuel economy and a high torque. For further reduction of NOx emissions the engines are also equipped with an exhaust gas recirculation, EGR, system developed by Scania. The engine can be fitted with many accessories such as air cleaners, radiators and PTOs in order to suit a variety of installations. Engine speed (rpm) 1500 rpm (50 Hz) PRP 1800 rpm (60 Hz) Standard equipment • Scania Engine Management System, EMS • Unit injectors, PDE • Turbocharger • Fuel filter and extra pre-filter with water separator • Oil filter, full flow • Centrifugal oil cleaner • Oil cooler, integrated in block • Oil filler, in valve cover • Deep front oil sump • Oil dipstick, in block • Magnetic drain plug for oil draining • Starter, 1-pole 6.0 kW • Alternator, 1-pole 100A • Flywheel, SAE 14 • Silumin flywheel housing, SAE 1 flange • Front-mounted engine brackets • EGR system • Open crankcase ventilation • Operator’s manual Optional equipment • Cooling package • Fan • Side-mounted PTO • Exhaust connections • Instrument panel • Engine heater • Stiff rubber engine suspension • Air cleaner • Closed crankcase ventilation • Studs in flywheel housing • Low coolant level reaction • Fine tune potentiometer • Ramp start delay • Ramp up rate PRP Gross power (kW) 248 273 Gross power (kVA) 275 300 Spec fuel consumption. Full load (g/kWh) 208 210 Spec fuel consumption. 3/4 load (g/kWh) 215 214 Spec fuel consumption. 1/2 load (g/kWh) 218 220 Heat rejection to coolant (kW) 113 122 PRP – Prime power: For continuous operation at varying load. Max mean load factor of 70% of rated power over 24 h of operation. 1 hour/12 hours period of accumulated peak overload to 110%. This specification may be revised without notice.

Open the catalog to page 1
DC971A_248-273kW - 2

SCANIA POWER GENERATION engines DC09 071A. 248-273 kW (275-300 kVA) EU Stage IIIA Engine description 4-stroke Firing order 1-2-4-5-3 Displacement 9.3 litres Bore x stroke 130 x 140 mm Compression ratio 16:1 Weight 950 kg (excl oil and coolant) Piston speed at 1500 rpm 7.0 m/s Piston speed at 1800 rpm 8.4 m/s Camshaft High position alloy steel Pistons Aluminium pistons Connection rods I-section press forgings of alloy steel Crankshaft Alloy steel with hardened and polished bearing surfaces Oil capacity 32-38 dm3 Electrical system 1-pole 24V 1:6974 5 in-line Working principle 1242 433 848 473...

Open the catalog to page 2

All SCANIA Industrial & Marine Engines catalogs and technical brochures

  1. DI16 071M

    2 Pages

  2. DI16 070M

    2 Pages

  3. DI13 073M

    2 Pages

  4. DI09 072M

    2 Pages

  5. DI13 070M

    2 Pages

  6. DC09 072A

    2 Pages

  7. DC13 072A

    2 Pages

  8. DI16 077M

    2 Pages

  9. DI13 085M

    2 Pages

  10. DI09 072M

    2 Pages

  11. DI16 070M

    2 Pages

  12. DI13 073M

    2 Pages

  13. DI13 072M

    2 Pages

  14. OC16 071A

    2 Pages

  15. DC13 093A

    2 Pages

  16. DC976A_257kW

    2 Pages

  17. DC974A_202kW

    2 Pages

Archived catalogs