For internal thread turning

Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut®, which on the North American market is sold under the name QuadThread®. TwinCut toolholders Our products are sold through distributors in more than 30 countries worldwide. • = Stock standard * = Limited stock

Internal threading TwinCut inserts Partial Profile 60° Internal threading The TwinCut system is suited for applications where larger pitches is required but where the hole diameter is limited.TheTwinCut system allows internal threading in holes with a diameter from 18 mm and above. The TwinCut insert has two cutting edges, with a chipbreaker sintered into it. TwinCut inserts can be used for both right-hand and lefthand threads, which cuts down your stock-keeping needs. The larger toolholders have replaceable cassettes for different insert sizes, which drastically reduces the tooIholder costs....

TwinCut inserts TwinCut inserts Internal threading Internal threading Whitworth (BSW, BSP) Internal threading Internal threading STUB ACME Internal threading Internal threading

TwinCut inserts TwinCut toolholders Internal threading Small toolholders Catalogue number QNR 0016K-14 QNR 0020M-14 QNR 0016K-18 QNL 0016K-14 QNL 0020M-14 NPTF Dryseal Internal threading WARNING! Always determine if NPT or NPTF profile should be used. Be sure you use the right one. Cassette-type toolholders Catalogue number QNR 0025P-C25 QNR 0032R-C25 QNR 0040S-C25 QNL 0025P-C25 QNL 0032R-C25 QNL 0040S-C25 Cassettes Insert 14N Insert 18N QNR 25-14 QNR 25-18 QNR 25-14 QNR 25-18 QNR 25-14 QNR 25-18 QNL 25-14 QNL 25-18 QNL 25-14 QNL 25-18 QNL 25-14 QNL 25-18 Stock standard • • • • • • Toolholders...

TwinCut toolholders Internal cassettes Catalogue number QNR 25-14 QNR 25-18 QNL 25-14 QNL 25-18 14N Scandinavian Tool Systems AB is a 18N • Swedish based14N manufacturer and supplier 18N turning,• thread milling, of tools for thread parting off and grooving. The main product is the QuadCut®, which on the North American market is sold under the name QuadThread®. Catalogue Our products are sold through distributors number in more than 30 countries worldwide. STS T15xM5 STS T15xM5 STS T15xM5 Used for Insert 14N Insert 18N Cassettes Keys Catalogue number Torx T15

Scandinavian Tool Systems AB Box 59, SE-793 12 Insjön, Sweden Phone +46 (0)247 410 20 [email protected] www.scandinavian-tool.se