*mydirectindustry

QuadCutOff

Product catalog summary

Overview: Scandinavian Tool Systems AB, a Swedish manufacturer, specializes in tools for thread turning, thread milling, parting off, and grooving. Their main product, QuadCut®, is known as QuadThread® in North America and is distributed in over 30 countries.

Product Specifications: The QuadCutOff tools are made from High Speed Steel (HSS) with a TiN-coating, designed for parting off and grooving, especially in applications involving thin wall tubes, soft materials, or low cutting speeds. These tools are precision ground for sharp cutting edges and can be used in Swiss type lathes.

Cutting Data: Recommended cutting speeds vary by material, with low-carbon steel at 40-60 m/min and cast iron at 20-30 m/min. Feed rates are specified for different inserts, with low carbon steel using a feed rate of 0.08-0.1 mm/revolution for Q16-1.0 inserts.

Parting-off Diameter: The maximum parting-off diameter on a solid bar is 13 mm with the Q16 insert and 20 mm with the Q25 insert. Larger diameters can be cut in tubes as the tool does not reach the center.

Insert Specifications: Various inserts are available, including straight and angular parting-off inserts, with dimensions and maximum cut-off diameters specified. TiN-coating is standard across all inserts.

Toolholders and Accessories: The document lists toolholders and screws compatible with the QuadCutOff system, including Torx keys for assembly.

Catalog excerpts

QuadCutOff High speed steel for parting off and grooving

Open the catalog to page 1

Cutting tools in High Speed Steel (HSS) Carbide inserts are used for most standard parting off and grooving. For special applications like thin wall tubes, soft materials or low cutting speeds, a high speed steel insert might prove more efficient. QuadCutOff is made of HSS and has a TiN-coating. Precision grinding of these tools gives extremely sharp cutting edges, which has an advantage in the above-mentioned applications. The tools can be used in Swiss type lathes. Choose GEX 1010K-Q16 or GEX 1212K-Q16, together with the special screw STS T7xM3S. Scandinavian Tool Systems AB is a Swedish based...

Open the catalog to page 2

QuadCutOff inserts QuadCutOff toolholders Straight Parting-off TiN-coated HSSC • • • • • Angular Parting-off Catalogue number TiN-coated HSSC Stock Pricestandard (k) group • • • • • • • • • • • TiN-coated HSSC Stock Pricestandard (k) group • External grooving Circlip grooves Catalogue number Catalogue number Catalogue number Insert Q16… Insert Q25… Insert Q16…/Swiss type Keys Catalogu

Open the catalog to page 3

Scandinavian Tool Systems AB Box 59, SE-793 12 Insjön, Sweden Phone +46 (0)247 410 20 [email protected] www.scandinavian-tool.se

Open the catalog to page 4

All SCANDINAVIAN TOOL SYSTEMS catalogs and technical brochures

QuadCut Kits®
2 Pages
ThreadMill
15 Pages
TwinCut
7 Pages
QuadGroove
2 Pages
QuadCut
27 Pages