1. Catalogs
  2. Scancon
  3. scancon encoders for wind turbine mail

scancon encoders for wind turbine mail

scancon encoders for wind turbine mail

scancon encoders for wind turbine mail

Product catalog summary
Introduction
SCANCON has been a leading manufacturer of encoders since 1973, exporting to over 78 countries. Their encoders are integral to wind turbine control systems, including speed measurement, pitch control, and yaw control.

Encoder Types for Wind Turbines
  • Gear Drive Generators: Incremental encoders like SCH94 for up to 4 MW and SCH108 for up to 6 MW generators.
  • Direct Drive Generators: Semi-absolute encoders such as SCA94DD and eCode 2048.
  • Pitch Control: Absolute incremental and eCode encoders like SAG (optical) and SCM (magnetic).
  • Yaw Control: Encoders such as SCA24, SCM, and SCH58FM.

Key Features and Specifications
  • SCH94: Hollow shaft encoder with IP66 protection, suitable for offshore applications with built-in transient suppression.
  • SCH94DOL: Offers dual output and similar features to SCH94.
  • SCH80: Offers resolution up to 12,500 ppr and terminal shutdown at 155°C.
  • SCH94FO: Fiber optic transmission up to 2,000 meters, ensuring no signal degradation.
  • SCA94DD: Designed for slow revolving direct drive generators with high resolution and Profibus interface.

Additional Products

Encoders for Pitch & Yaw Control
  • SCA24: Shaft encoder with resolution up to 7,500 ppr.
  • SCH68F: Hollow shaft encoder with resolution up to 2048 ppr.
  • Absolute Encoders: SAG and SCM offer high resolution and various communication protocols like Profibus and CANbus.

Transient Suppression Module (TSM)
All SCANCON incremental encoders include a built-in TSM to protect against electrical disturbances, though it is not a lightning protection device.

Contact Information
SCANCON's head office is located in Hillerød, Denmark, with additional offices in South America and China. For more information, visit their website or contact them via email or phone.
See more

Catalog excerpts

scancon encoders for wind turbine mail-1

Encoders for wind turbine applications

 Open the catalog to page 1
scancon encoders for wind turbine mail-2

SCANCON has been manufacturing encoders since 1973, and is well known for its high quality encoders and special solutions. SCANCON exports encoders to more than 78 countries worldwide, from our factory and head office, near Copenhagen. Introduction: Today SCANCON encoders are used all over the world in different applications in the turbine control system. Which include: speed measurement of the Generator. Pitch controller, and Sleeve Rings and YAW controller. SCANCON have many different encoders for the wind turbine: Transient Suppression Module: All SCANCON encoders (incremental types) for wind...

 Open the catalog to page 2
scancon encoders for wind turbine mail-3

Wind turbine applications Scancon encoders Scancon has supplied encoders to the Wind Industry for over 20 years. Satisfied customers have used our encoders in their Pitch Control Systems, their Yaw Control Systems, and for their Generator feedback. Scancon continues to work with customers to provide innovative solutions to meet the changing demands of the wind industry. Encoders for generators Types: • • • • • • • • Encoder for Pitch drive control system Types: • • • • • Wind Power 1 Rotor blades 2 Pitch drive 3 Nacelle 4 Brake 5 Low-Speed shaft 6 Gear box 7 High-Speed shaft 8 Generator 9 Heat...

 Open the catalog to page 3
scancon encoders for wind turbine mail-4

Hollow Shaft Encoder - 0 80 mm Hollow Shaft Encoder - 0 94 mm • Hollow Bore - 0 1/4 in to 10 mm • Hollow bore - 0 12 mm, 0 16 mm or 0 17 mm Standard IP 65 (IP 66 & IP 67 options) Resolution up to 12.500 ppr Terminal Shut down at 155° C Built-in Transient Suppression Module Diameter: 0 80 mm IP 66 (IP 65 & IP 67 options) ChromitAL TCP passivation for Offshore Applications Built-in Transient Suppression Module Diameter: 0 94 mm SCH94DOL Hollow Shaft Encoder - 0 94 mm • Hollow bore 0 16 mm • IP 66 (IP 65 & IP 67 options) • Dual Output (Redundant) • ChromitAL TCP passivation for Offshore Applications...

 Open the catalog to page 4
scancon encoders for wind turbine mail-5

SCA24 Shaft Encoder • Diameter: 24 mm • Resolution: up to 7,500 ppr • Shaft: 0 1,5 mm to 0 6,35 mm (1/4 inch) • Temperature: -40° C to 85° C (operating) • Option: Analog • Applications: Pick'n place Machines, Packaging, Beverage SCH32B Hollow Shaft Encoder • Diameter: 32 mm • Resolution: up to 5,000 ppr • Hollow Shaft: 0 6 mm to 0 9,525 mm (3/8 inch) • Temperature: -40° C to 85° C (operating) • Applications: Pick'n place Machines, Packaging, Beverage SCH68F Hollow Shaft Encoder • Diameter: 0 68 mm (2.68") • Hollow bore 0 20 mm to 1" • Resolution up to 2048 ppr • IP 67 option • Shaft Loads to...

 Open the catalog to page 5
scancon encoders for wind turbine mail-6

Encoders for Pitch & Yaw Controls Absolute Encoders SAG (Profibus, Profitnet, CANbus, DeviceNet, SSI) Optical SCM (Profibus, Profitnet, CANbus, DeviceNET, SSI) Magnetic • Diameter: 58 mm • Resolution: Up to 16 bits (Singleturn) Up to 30 bits (Multiturn) • Shaft: ø 6 mm or ø 10 mm • Protocol: Profibus • Temperature: -40° C to 85° C (operating) • Diameter: 36 mm • Resolution: up to 12 bits (Singleturn) up to 25 bits (Multiturn) • Hollow Shaft: ø4 mm • Protocol: SSI • emperature: -30° C to 85° C (operating) T Additional Options SCH94FO • Transmission of incremental encoder signal, up to 2000 Meters,...

 Open the catalog to page 6
scancon encoders for wind turbine mail-7

Encoders for YAW Controls Devices Transient Suppression Module Scancon’s Transient Suppression Module is intended to be used in environments where severe electrical transient and disturbances are encountered. The module will protect the encoder electronic from malfunctioning due to disturbances coming through the cable. It is available as a stand-alone product and is also incorporated into several encoder models. All SCANCON incremental encoders for wind turbine have built in TSM Note: TSM is not a lighting protection device. However if there is lighting in nearby area, the TSM will absorb electrical...

 Open the catalog to page 7
scancon encoders for wind turbine mail-8

Denmark, head office and factory: SCANCON Encoders A/S Huginsvej 8 3400 Hillerod, Denmark www.scancon.dk E-mail: [email protected] Pho: +45 48 17 27 02 China office: SCANCON Encoders A/S Room 1905, floor 19, Building Shen Yin Fa Zhan Wuding Road # 327, Jing An District, Shanghai, Zip 200040, P.R. China www.scancon.cn Email: [email protected] Pho: +86 21 6218 6148 South America: SCANCON Encoders A/S Douglas Guimaraes de Oliveriea Preto Rua Varzea Paulista. 305. 2° Andar. Sala 07 CEP: 13202-700 Vila Agricola Jundiai - SP, Brazil E-mail: [email protected] Pho: +55 11 4526 6989

 Open the catalog to page 8
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.