Catalogs >
Scancon >
SCA24-IP65

SCA24-IP65
4Pages

Catalog excerpts

Automation / Mini Output Current: Frequency Response: Output Format: Phase Sense: Mechanical Specifications Electrical Specifications Output Voltage: Supply Voltage: Shaft Encoder - Incremental 1 to 7500 ppr (pulses per revolution) 4,5 Vdc min. to 30 Vdc max. (35 mA max. - no load) Low: 500 mV max. at 10 mA High: (Vin – 0,6) at -10 mA (Vin – 1,3) at -25 mA 25 mA max. load per output channel 200 kHz max. Housing: Brass Cap: Electroplated Steel Aluminum (flat cable option) Shaft: Stainless Steel Encoder: ~ 35 gr (1,23 oz) Cable: 50 gr / meter (1,76 oz / meter) Bearing Life: > 1,9 x 1010 revolutions at rated load Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads: Two channel (A, B) quadrature with Index (Z) and optional complementary (A-, B-, Z-) outputs A leads B clockwise (CW) from the mounting end of the encoder Environmental Specifications Gated with Channels A and B high Operating Temp.: Storage Temp.: ASIC Push pull and Differential OL7272 Push-pull and Differential Line Driver 26C31 Differential Line Driver 5V output (with 5V input) Reverse polarity and output short circuit protected Enclosure Rating: Electrical Protection: Noise Immunity: Tested to EN61000-6-2 : 2005 (industrial environments) Electromagnetic compatibility (EMC) and EN 61000-6-3 : 2007 (residential, commercial, and lightindustrial environments) for Electromagnetic compatibility (EMC) Connection Options Cable: 8 leads (0,05 mm2, 30 AWG) - Differential 5 leads (0,14 mm2, 26 AWG) - Standard twisted pairs; shielded Flat Cable: 10 lead flat cable with IDC connector ** = It is recommended user not to combine max. values for all 3 parameter

Open the catalog to page 1

Type SCA24-IP65 Output waveform Disk Resolutions (pulses per revolution) Other options on request Pulses per revolution, min. 1 – max. 7.500 Channel tolerance Phase difference tolerance Z channel tolerance Mechanical Dimensions Tolerances according to ISO 2768 f

Open the catalog to page 2

Type SCA24-IP65 Tolerances according to ISO 2768 f Output Terminations Standard Output Channel A AB BZ ZVsup GND Differential Output Wire Color Green NC Yellow NC Gray NC Brown White Pink Gray Green Yellow White Brown Red Blue Standard Output Standard Cable Differential Output

Open the catalog to page 3

Type SCA24-IP65 Ordering Code Shaft Length Cable Length Cable Takeout Standard Differential 26C31 Line Driver 5V only Standard – Open Collector NPN Standard – Open Collector PNP OL 7272 Line Driver Standard - with built-in TSM ** Standard Cable Standard is 1 meter Specify length No cable Flat Cable w/ IDC 0,5 meter 1,0 meter 2,0 meters Flat Cable Side (radial) Standard cable S Side (radial) PUR cable PUR Back (axial) B ** Designed specifically for Wind Power applications. See SCA24 COC under Industries – Wind Power – SCA24 for additional conformity standards testing. Other options on...

Open the catalog to page 4

SCA24-IP65 4Pages

Catalog excerpts

All Scancon catalogs and technical brochures

SCA24-IP65
4Pages