Mechanical Dimensions and Specifications
The document outlines the mechanical dimensions and specifications of a hollow shaft encoder. It features a strong mechanical construction suitable for harsh industrial environments, with a high IP rating of IP66 or optional IP67. The encoder is designed for direct connection to PLCs and counters, with thermal shutdown at 155°C and a wide supply voltage range from 4.5V to 30V. It is built with stainless steel materials and lifetime lubricated ball bearings, supporting axial and radial loads up to 50 N and a maximum revolution of 1500 rev./min (3000 rev./min for IP66).

Electrical Specifications
The encoder operates at a temperature range of -40°C to +75°C, with a maximum pulse frequency of 300 kHz. It features incremental output signals (A, B, Z) with options for standard, inverted, or differential outputs compatible with RS-422A. The encoder is EMC certified according to EN 50081-1 and EN 50082-2, and EEx certified according to EN 50014 and EN 50018. It includes reverse polarity protection and short circuit protection.

Output and Connection Options
The encoder offers various output waveform options, including TTL or HTL compatibility, and open collector NPN or PNP. It supports gated or non-gated Z-pulses. The document provides detailed ordering codes for different configurations, including pulse per revolution, material, output signal, shaft dimensions, IP rating, and cable length. Connection options include side or back cable take-out with hydraulic hose protection.

Ordering and Customization
The document includes ordering codes for customization, allowing selection of pulse per revolution, material, output signal type, shaft dimensions, IP rating, and cable length. It also provides options for cable protection and face mount configurations.

Contact Information
For further inquiries, contact details are provided: TLF. +45 48 17 27 02, FAX +45 48 17 22 84, email: [email protected], website: www.scancon.dk.