- Catalogs
- Scaldopack NV
- Monofiller Multihead 2
Monofiller Multihead 2
Monofiller Multihead 2
- Pouch Dimensions: Width 65-320 mm, Length 90-400 mm, Range 25 ml-6,000 ml.
- Applications: Suitable for fluids and semi-fluid foods, beverages, non-food fluids like motor oils, cosmetics, pharmaceuticals, and detergents.
- Pouch Types: Pre-made standing pouch with top center or corner spout.
- Filling & Capping Speed: Up to 60 ppm, depending on pouch size and spout diameter.
- Buffer Tank: Standard 50 l single wall, with options for special tanks.
- Dosing: Uses lobe, piston, or peristaltic pumps, handling temperatures up to 90°C, with higher temperatures on demand.
- Capping: 3-finger gripper controlled by servo motor.
- Filling Nozzles: 2
- Power Requirements: 40 A, 3 x 380 V AC + N + PE, 50-60 Hz.
- Compressed Air: 200 Lpm, 6 bar.
- Materials: Mainly stainless steel 304, with product-contact parts in stainless steel 316L or FDA-approved plastics.
- Remote Access: Standard on all machines.
- Weight: Approximately 1,800 kg.
- Space Needed: 5.00 m x 1.50 m.
- Height Needed: 3.50 m.
Catalog excerpts
Description: Monofiller Multihead 2 is a servo driven, fully automatic filling machine fitted for large production plants. This is an industrial machine for companies who are in need of a reliable pouch filling. This is a machine with high production capacity to meet with constant demand. Possible spout positions and pouch shapes: • • Top and corner spout. Special shapes of pouches or spout features are possible but it can subject to technical assessment. Pouch shape – square, round or shaped. In some cases special tooling for handling certain shapes will be needed. Scaldopack nv - Hospitaalweg 10A – 8510 Kortrijk (Marke) – Belgium T: +32 (0)56 49 94 98 – www.scaldopack.com - VAT BE 0820 431 542
Open the catalog to page 1
Machine specifications for Monofiller Multihead 2: Pouch Dimensions (min – max) Width Pouch range Typical applications Type of pouches Filling & capping speed Fluids and semi fluid foods & beverages, nonfood fluids like motor-oils, cosmetics, pharmaceutical products, detergents,… Pre-made standing pouch, top centre or corner spout Up to 60 ppm, depending on the size of the pouch and the diameter of the spout Single wall buffer tank of 50 l Buffer tank Capping Number of filling nozzles Pouch loading system Power line Power connections Frequency Compressed air Materials used Special tanks are available:...
Open the catalog to page 2
Remote access Standard available on all our machines Dimensions Machine weight Surface space needed Height needed Machine Compliance: • • • Machinery Directive 2006/42/EG Machine complies with UL and CSA Standards upon request. CE marked Stainless steel construction, heavy duty, solid welded machine. Flexible filling and capping machine for a wide range of pouch sizes (width 65 – 320 mm and length – 90 – 400 mm) Machine will be fed with pre-made standing pouch, three side seal pouch and side gusset pouch. Safe Process Automated feeding of pouches into the machine on a rail system Remote technical...
Open the catalog to page 3
Very quick change over from one pouch to another (less than 10 minutes) Only a small space is needed to run many different types of pouches. Scaldopack nv - Hospitaalweg 10A – 8510 Kortrijk (Marke) – Belgium T: +32 (0)56 49 94 98 – www.scaldopack.com - VAT BE 0820 431 542
Open the catalog to page 4
Machine Layout: (*) All information and measurements mentioned in this document are merely indicational and for informational purposes only. Information and measurements in this document can be subject to changes without further notice. For the latest info always revert to Scaldopack. Scaldopack nv - Hospitaalweg 10A – 8510 Kortrijk (Marke) – Belgium T: +32 (0)56 49 94 98 – www.scaldopack.com - VAT BE 0820 431 542
Open the catalog to page 5All Scaldopack NV catalogs and technical brochures
Monofiller Stepper5 Pages
Monofiller Multihead 45 Pages
Our machines6 Pages
