Tension/Compression Force Sensor-K11

1 / 2 PagesView full catalog

Tension/Compression Force Sensor-K11

Product catalog summary

Force Sensors - Tension/Compression

Specifications:

Nominal Load (C.N.): 0.5 to 2000 kN
Material: Stainless Steel
Protection Level: IP60
Service Load: 130% C.N.
Ultimate Load: >300% C.N.
Deflection at Nominal Load: <0.12 mm

Accuracy:

Linearity Error: ±0.05% C.N.
Combined Error: ±0.15% C.N.
Hysteresis: ±0.03% C.N.
Repeatability: ±0.03% C.N.

Electrical Characteristics:

Bridge Resistance: 350 Ω
Insulation Resistance: >2 x 10⁹ Ω
Supply Voltage: 2 ... 12 Vcc (Max 15 Vcc)
Output Signal: 2.00 mV/V

General Characteristics:

Temperature Coefficient of Sensitivity: <0.005% C.N./°C
Temperature Coefficient of Zero Signal: <0.003% C.N./°C
Compensated Temperature Range: 0 ... +60 °C
Operational Temperature Range: -10 ... +70 °C

Options:

Calibration Control: 100% C.N.
Extended Temperature Range: -30 ... +100 °C (C.N. ≥ 2 kN: -40 ... +120 °C)
Special Ranges Available

Accessories:

Load Adapter: Various sizes available for different nominal loads

Connection:

6-point Connector

Additional Information:

All dimensions are in mm and specifications are subject to change without notice.
ISO 9001:2008 certified

Catalog excerpts

Capteurs de Force - Traction/Compression Tension/Compression Force Sensor Construction en Acier Inoxydable Haute précision Degré de protection IP60 Mesure de traction et compression Grande stabilité à long terme Stainless steel construction High accuracy Level protection IP60 Tension and compression force High longlife testing machines Câblage - Wiring + alim. + excit. borne 2 pin 2 * option + signal + signal borne 4 pin 4 - signal - signal borne 5 pin 5 Type 1 (avec lamage) - alim. - excit. borne 1 pin 1 Cran de calibration* Calibration control* borne 6 pin 6 Masse Shield borne 3 pin 3 Type 2 Connecteur 6 points Connector 6 points Lamage "S" pour tête de vis (DIN 912) Counterbored hole for screw "S" (DIN 912) Toutes dimensions en mm. Dimensions et spéciﬁcations non contractuelles. All dimensions in mm. Dimensions and speciﬁcations do not constitute any liability whatsoever.

Open the catalog to page 1

Capteurs de Force - Traction/Compression Tension/Compression Force Sensor Force de travail admissible Force ultime avant rupture Déﬂexion sous force nominale Service load Ultimate load Position feedback at nominal load Erreur de linéarité en traction ou compression Erreur combinée en traction et compression Hystérésis Répétabilité Linearity error for tension or compression Combined error for tension and compression Hysteresis Repeatability Impédance du pont Résistance d’isolement Tension d’alimentation Tension d’alimentation max. Signal de sortie Bridge resistance Insulation resistance Supply...

Open the catalog to page 2

All SCAIME catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list