Non rotating Torque Sensor - D2452

Product catalog summary

Overview: This document provides technical specifications for non-rotating torque sensors with a measurement range from 0.005 Nm to 20,000 Nm. These sensors are designed for high accuracy and overload capacity, featuring a smooth shaft without a keyway.

Specifications:

Nominal Torque: Ranges from 0.005 Nm to 20,000 Nm.
Dimensions: Various dimensions are provided for different nominal torque values, all in millimeters.
Sensitivity: Varies with nominal torque, expressed in mV/V.
Springrate: Provided in Nm/rad for different torque values.
Service Torque: Percentage of nominal torque, indicating the allowable working torque.
Ultimate Torque: Percentage of nominal torque before failure.
Max Dynamic Load: Percentage of nominal torque for dynamic applications.

Technical Characteristics:

Mechanical: Includes nominal torque, service torque, ultimate torque, and twist angle at nominal torque.
Accuracy: Accuracy class is ±0.1% of nominal torque, with repeatability at ±0.05%.
Electrical: Supply voltage ranges from 2 to 12 VDC, with an output signal specified in mV/V and a bridge resistance of 1,000 Ohm.
General: Compensated temperature range is -5 to +45 °C, and operational temperature range is -15 to +55 °C.

Connection Details: The sensors use connectors with 6 or 7 pins, with specific functions assigned to each pin, including power supply, signal, and optional calibration control.

Compliance: The product adheres to ISO 9001:2008 standards.

Additional Information: Accessories and options such as calibration control are available. The manufacturer reserves the right to make modifications without prior notice.

Catalog excerpts

Capteurs de Couple - Non rotatif Non rotating Torque Sensor Couplemètre non rotatif Axe lisse des 2 côtés Très larges étendues de mesure Grande précision Grande capacité de surcharge Non rotating torquemeter Shaft without keyway Very large range High accuracy High overload Connecteur 7 points Connector 7 points Côté mesure Measuring side Toutes dimensions en mm - All dimensions in mm Couple Nominal (C.N.) Nominal Torque [Nm] 0.005, 0.01, 0.02

Open the catalog to page 1

Capteurs de Couple - Non rotatif Non rotating Torque Sensor Connecteur 7 points Connector 7 points Connecteur 6 points Connector 6 points Côté mesure Measuring side Côté mesure Measuring side ≥ 20 Nm Toutes dimensions en mm - All dimensions in mm Connecteur 6 points Connector 6 points Côté mesure Measuring side Toutes dimensions en mm - All dimensions in mm

Open the catalog to page 2

Capteurs de Couple - Non rotatif Non rotating Torque Sensor Caractéristiques Techniques - Technical speciﬁcations Couple Nominal (C.N.) Nominal Torque Raideur Springrate Sensibilité Sensitivity Couple de travail admissible Service torque Couple ultime avant rupture Ultimate torque Couple dynamique max. Max. dynamic load Fonction - Function - alim. + alim. blindage + signal - signal Cran de calibration (option) NC - excit. + excit. shield + signal - signal Calibration control (option) NC

Open the catalog to page 3

Capteurs de Couple - Non rotatif Non rotating Torque Sensor MÉCANIQUES Couple Nominal (C.N.) Couple de travail admissible Couple ultime avant rupture Angle de torsion à C.N. MECHANICAL Nominal Torque (C.N.) Service torque** Ultimate torque Twist angle at C.N. PRÉCISIONS Classe de précision Répétabilité ACCURACY Accuracy class Repeatability ÉLECTRIQUES Tension d’alimentation Signal de sortie Résistance du pont ELECTRICAL Supply voltage Output signal Bridge resistance Connection type Voir page - See page 3 Voir page - See page 3 Voir page - See page 3 ≤ 0.2 2 ... 12 Vcc Voir page - See page 3 mV/V...

Open the catalog to page 4

All SCAIME catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list