Load cell - Single point- AXH

Product catalog summary

Specifications:
The document provides technical specifications for the AXH load cell, which is designed for single-point scales and dosing systems in humid and corrosive environments. It is constructed from stainless steel and is hermetically welded, offering protection levels of IP68 and IP69K. The load cell is approved for up to 3,000 divisions according to OIML R60 standards.

Technical Features:
- Load capacity ranges from 100 kg to 500 kg.
- Compensated temperature range: -10°C to +40°C.
- Operating temperature range: -20°C to +60°C.
- Safe load limit: 150% of maximum capacity (Emax).
- Ultimate overload capacity: 200% of Emax.
- Protection class: IP68/IP69K.
- Material: Stainless steel body with PVC cable sheath.
- Cable length: 3 meters.
- Net weight: 1.3 kg.

Electrical Specifications:
- Excitation voltage range: 1 to 15 V.
- Rated output: 2 ±10% mV/V.
- Zero balance: ±1% of rated capacity (Cn).
- Input/output resistance: 385 ±20 / 350 ±5 Ω.
- Insulation resistance: 5,000 MΩ/50V.

Metrological Specifications:
- Accuracy class: C3.
- Maximum capacity (Emax): 100 kg, 500 kg, 250 kg.
- Maximum number of load cell intervals (nmax): 3,000.
- Minimum verification interval (vmin): 10 g, 50 g, 20 g.
- Combined error: ±0.017% of Cn.
- Temperature effect on zero: ±0.0014% of Cn/°C.
- Temperature effect on sensitivity: ±0.0014% of Cn/°C.
- Creep error (30 min.): ±0.025% of Cn.
- Maximum platform size: 600 x 600 mm.

Certifications and Compliance:
The load cell complies with ATEX 94/9/EC and IECEx standards, suitable for use in hazardous areas (zones 0/20 and 2) with specific temperature and protection ratings.

Additional Information:
SCAIME reserves the right to modify specifications without prior notice. Technical drawings are available upon request.

Catalog excerpts

Fiche Technique Data Sheet Capteurs de Pesage - Appui central Load cell - Single point Stainless steel construction, hermetically welded (IP68, IP69K) 3 000 d OIML R60 approved Ideally suited for single point scales in humid and corrosive environments Off-center load compensated Patented design to combine high accuracy and high environmental protection level Charge / Load Construction en acier inoxydable, soudé hermétiquement (IP68, IP69K) Homologué jusqu’à 3 000 d OIML R60 Idéal pour balances monocapteur et doseuses pondérales, utilisées en environnement humide et corrosif Excentration de charge compensée Conception breveté alliant haute précision et haute tenue environnementale Face d'appui Mounting surface Câblage - Wiring + alim. + excit. marron brown + signal + signal jaune yellow - signal - signal blanc white - alim. - excit. vert green + réf. + sense gris grey - réf. - sense rose pink Toutes dimensions en mm. Dimensions et spéciﬁcations non contractuelles. Dessins techniques disponibles sur demande. All dimensions in mm. Dimensions and speciﬁcations do not constitute any liability whatsoever. Technical dr

Open the catalog to page 1

Caractéristiques - Speciﬁcations MÉTROLOGIQUES Erreur combinée Combined error Effet de la temp. sur le zéro Temperature effect on zero Effet de la temp. sur la sensibilité Temperature effect on sensitivity Taille de plateau maximum Maximum platform size MÉTROLOGIE LÉGALE OIML R60 LEGAL METROLOGY OIML R60 Accuracy class Capacité maximale (Emax) Maximum capacity (Emax) Nombre max. d’échelons (nmax) Max. number of LC intervals (nmax) Échelon de vériﬁcation min. (vmin) Minimum veriﬁcation interval (vmin) Plage de tension d’alimentation Nominal range of excitation voltage Plage de zéro initial Zero...

Open the catalog to page 2

Load cell - Single point- AXH

Load cell - Single point- AXH

Catalog excerpts

All SCAIME catalogs and technical brochures

Archived catalogs