*mydirectindustry

Catalogs
SCAFFCO
Shorelok-System (Ring Lock)

Shorelok-System (Ring Lock)

Product catalog summary

Overview

This document serves as a comprehensive technical reference for SCAFFCO's Shorelok Ring Lock formwork and scaffolding systems, detailing components, specifications, finishes, weights, dimensions, and connection methods to ensure safe and modular assembly in construction applications.

1. Shorelok System (Ring Lock) Components

Horizontal Formwork Tubes: Two main diameters (48.3mm - SL-48 and 60.3mm - SL-60) with lengths from 0.5m to 3.0m, spaced at 50cm between rings. Finishes include Painted, Electroplated, and Hot Dip Galvanized. Weights vary by size and length (e.g., SL-48 from 2.25kg to 13.5kg).
Ledgers (SLL): Lengths from 30cm to 300cm, weights 1.76kg to 10.81kg, attached to vertical standards via M9x75mm half-threaded bolts and nuts.
Diagonal Braces (SL DB): Sized by center-to-center diagonal distance, lengths 60cm to 300cm, weights 3.65kg to 15.02kg, with multiple finish options.
Radial Ledgers (SLR): Designed for curved scaffolding, with specified dimensions and weights.
Cantilever Beam Frames (CBF): Available in 100cm and 150cm lengths, 48.3mm diameter tubes, weights approx. 17.14kg to 20.22kg depending on finish.
Beam Brackets (BB): 100cm and 150cm lengths, 48.3mm diameter, painted or electroplated finishes, weights 5.50kg to 7.28kg.

2. Jacks and Adjustable Components

Base Jacks (BJ) and U-Head Adjustable (UHA) components come in various sizes and finishes (Painted, Electroplated), with base dimensions typically 20x20cm and U-Head 10x20x30cm, including stiffeners.
Weights range from approximately 3.16kg to 6.62kg depending on size and finish.
Universal Jacks available in lengths 65cm, 76cm, and 86cm, with options for tow nuts and holes.

3. Scaffold Tubes and Couplers

Scaffold tubes of 48.3mm diameter offered in black, painted, and galvanized finishes, lengths from 50cm to 600cm with corresponding weights.
Couplers include double and swivel types, available in pressed and drop-forged variants for sizes 1.5"x1.5" and 2.0"x1.5".
Additional components such as pigtail pins, spigot connectors, and base plates are detailed with dimensions and finishes.

4. Steel Boards and Anchor Plates

Steel boards (SB) available in lengths 50cm to 400cm, painted or electroplated.
Anchor plates offered in A-Type (plain end) and B-Type (with hook), dimensions 22cm width and 6.6cm thickness.
Bolts and nuts specified in various sizes (M10, M12, M16) with full or half threading for secure assembly.

5. Additional Components and Accessories

Includes guardrail frames, forkheads, socket base adapters, and dropheads with specifications on size, finish, and attachment methods.
All components designed for compatibility with the Shorelok Ring Lock system and standard scaffolding practices.

Critical Information and Best Practices

Standard tube diameters are 48.3mm or 60.3mm depending on component type.
Finishes (Painted, Electroplated, Hot Dip Galvanized) are essential for corrosion resistance and durability.
Connection hardware (bolts, nuts, washers, pins) specified by size and threading to ensure secure and safe assembly.
Component weights and dimensions must be considered for load-bearing calculations and safe erection.
Consistent 50cm spacing between rings (nodes) ensures modularity and structural integrity.

Product Overview - Timber Components

H20 Timber Beams (TB): Crosswise laminated solid timber panels with three layers, lengths from 125cm to 1190cm. Key parameters: moment resistance 5.00 kN.m, shear capacity 11 kN, cross-sectional area 18.87 cm², flexural rigidity (E.I) 500 kNm².
Wooden Planks (WP): Laminated timber boards sized 38x225 mm, lengths 1000mm to 3900mm, used for decking or protection.
Marine Plywood: Thicknesses 12mm and 18mm, size 244x122 cm, for enhanced durability and damage protection.

Product Overview - Aluminum Components

Aluminum Beams T150: Timber size 38x38 mm, mill finish, moment resistance 13.00 kN.m, area 18.87 cm², inertia xx 574.3 cm⁴, inertia yy 147.4 cm⁴, section modulus Zxx 75.36 cm³, Young’s modulus 69000 N/mm². Weight 5.80 kg/m with timber, 5.05 kg/m without timber.
Aluminum Beams S150: Timber size 38x38 mm, mill finish, moment resistance 6.80 kN.m, area 11.96 cm², inertia xx 356 cm⁴, inertia yy 43.764 cm⁴, section modulus Zxx 47.15 cm³, Young’s modulus 69000 N/mm². Weight 3.95 kg/m with timber, 3.20 kg/m without timber.

Connectors and Accessories

Universal Forkhead (UFH): Available in painted and aluminum painted finishes for beam connections.
Supporting Forkhead (SFH): Painted finish for additional beam support.
Universal Clamps: Designed for aluminum-to-soldier and H20-to-H20 connections, available in electroplated and painted finishes.
Beam Frames and Forks: Various beam frames (P, EP, GI) and beam forks with specified tube diameters and lengths, finished painted or electroplated.
GR Posts and Brackets: GR posts 150cm length with electroplated finish and universal GR brackets for beam frame connections, painted or electroplated.
End Strip: Used for wooden board protection.

Technical Specifications and Parameters

Detailed moment resistance, shear capacity, cross-sectional area, and flexural rigidity for timber and aluminum beams.
Beam dimensions and weights specified for different lengths and finishes.
Material properties such as Young’s modulus for aluminum beams included.
Connection hardware specifications include bolt sizes (e.g., M16x75 mm, M12x100 mm) and finishes.

Recommendations and Usage

Components designed for modular assembly in horizontal formwork systems, ensuring load-bearing capacity and structural integrity.
Use marine plywood and laminated timber to enhance durability and damage protection.
Select beam sizes and connectors based on load requirements and span lengths.
Choose finishes (painted, electroplated, mill finish) according to environmental exposure and corrosion resistance needs.

Contact Information

For further details and orders, contact SCAFFCO offices in Dubai and Abu Dhabi via telephone, fax, or P.O. Box. Website: www.scaffco.com

Catalog excerpts

SCAFFCO Formwork & Scaffolding

Open the catalog to page 1

Horizontal Formwork | Load Bearing | Shorelok System (Ring Lock) The Superior Formwork System for Shoring, load Bearing and Access Applications

Open the catalog to page 2

Shorelok System (Ring Lock) | Load Bearing | Horizontal Formwork Shorelok is a heavy duty modular steel shoring system designed for large shoring heights and high loads. With various well designed sizes in verticals, horizontals and an extensive range of accessories, shorelok is the first choice in modular heavy duty shoring. The system provides perfect adaptability to irregular layout with ease of assembly and low cost. Options for finish are available in painted or galvanized. To suit various site requirements the shorelok system is produced in two versions with compatible components: 0 The...

Open the catalog to page 3

Horizontal Formwork | Load Bearing | Shorelok System (Ring Lock) Shorelok Standards The Shorelok verticals are available to suit any propping or access application economically. The innovative rosette is set at 50cm vertical intervals for maximum versatility in use. Two series of standards are produced to suit various applications. The 60.3 mm dia. standards can be used efficiently for heavy loading applications especially in bridges or transfer slabs. While the 48.3 mm dia. Standards can be used for normal load bearing and access applications.

Open the catalog to page 4

Shorelok System (Ring Lock) | Load Bearing | Horizontal Formwork Steel Waling U-Head Adj. 38 Shorelok System (Ring Lock)

Open the catalog to page 5

Horizontal Formwork | Load Bearing | Shorelok System (Ring Lock) Nominal Ledger Length Radial Ledger are designed to connect the Shorelok 60 verticals in a horizontal plan. The 48.3mm radial ledger used to add extra strength enables the Shorelok 60 to transfer high loads efficiently and safely.

Open the catalog to page 6

Shorelok System (Ring Lock) | Load Bearing | Horizontal Formwork Shorelok 60 Diagonal Brace Diagonal Braces are made from 48.3mm dia. tube with a swivel ledger end and wedge secured at each end for connection to the rosette on the Standard. Their function is to provide transverse and longitudinal bracing to the scaffold structure. The brace is available in various lengths to suit the combination of bay widths and heights. Shorelok System (Ring Lock)

Open the catalog to page 7

Horizontal Formwork | Load Bearing | Shorelok System (Ring Lock)

Open the catalog to page 8

Shorelok System (Ring Lock) | Load Bearing | Horizontal Formwork \\iMWM7a 5i ii!! I IliiiR T4 SIIIIHim* mm.m ™ w\\y* Shorelok System (Ring Lock)

Open the catalog to page 9

Horizontal Formwork | Load Bearing | Shorelok System (Ring Lock)

Open the catalog to page 10

Shorelok System (Ring Lock) | Load Bearing | Horizontal Formwork Shorelok System (Ring Lock)

Open the catalog to page 11

Horizontal Formwork | Load Bearing | Shorelok System (Ring Lock)

Open the catalog to page 12

Shorelok System (Ring Lock) | Load Bearing | Horizontal Formwork Primary Decking Steel Waling Alum. Beam T225 Secondary Decking Shorelok System (Ring Lock) Alum. Beam SI50 LVL Beam

Open the catalog to page 13

Horizontal Formwork | Load Bearing | Shorelok System (Ring Lock) Technical Data Deflection (mm) permissible axial load (kN) Axial Load Axial Load FREE BUCKLING LENGHT (m) (Vertical c/c of Ledgers) 16 . P (kN/m) 14 | | I N I III I I I 12 I M=Bending Moment Q=Shear Force 10 | P=Applied Load 8 I —

Open the catalog to page 14

Shorelok System (Ring Lock) | Load Bearing | Horizontal Formwork Span (m) Span (m) Span (m) Uniformly Distributed Load (kN/m) Uniformly Distributed Load (kN/m) Uniformly Distributed Load (kN/m)

Open the catalog to page 15

Horizontal Formwork | Load Bearing | Shorelok System (Ring Lock)

Open the catalog to page 16

Shorelok System (Ring Lock) | Load Bearing | Horizontal Formwork

Open the catalog to page 17

Shorelok Standard (SL) - 48 Wt. (kg)_Code _ SL- 48 Standard 050 cm Painted SL- 48 Standard 100 cm Painted SL- 48 Standard 150 cm Painted SL- 48 Standard 200 cm Painted SL- 48 Standard 250 cm Painted SL- 48 Standard 300 cm Painted CROSS SECTION Finish: Painted or EP or H ot Dip Galvanized Tube dia.: 48.3mm 50cm between rings (Nodes). Shorelok Standard (SL) - 60 SL- 60 Standard SL- 60 Standard SL- 60 Standard SL- 60 Standard SL- 60 Standard SL- 60 Standard I 050 cm Painted 100 cm Painted 150 cm Painted 200 cm Painted 250 cm Painted 300 cm Painted IYPICAL CROSS SECTION 3.0m Finish: Painted or EP...

Open the catalog to page 18

Shorelok Beam Bracket (SL BB) Finish: as shown Tube dia.: 48.3mm Painted SL BB100 cm SL BB150 cm Electroplated SL BB100 cm SL BB150 cm Hot-dip galvanized SL BB 100 cm SL BB150 cm D/F Jack handle 38mm Hollow tube Plate 15x15cm (With holes) Plate 12x12cm (Without holes) Finish: Painted or electroplated Painted GS UHA 38H:65 cm:10x10x15 P GS UHA 38H:65 cm: 10x17x15 P GS UHA 38H:65 cm: 10x17x20 P GS UHA 38H:65 cm: 10x19x20 P GS UHA 38H:65 cm:10x21x20 P GS UHA 38H:76 cm:10x10x15 P GS UHA 38H:76 cm: 10x17x15 P GS UHA 38H:76 cm: 10x17x20 P GS UHA 38H:76 cm: 10x19x20 P GS UHA 38H:76 cm:10x21x20 P Finish:...

Open the catalog to page 19

Shorelok 60 - Base Jack & U-Head Adj. (4mm) Scaffold Tube (ST) Painted Shorelok 60 Base Jack (SL-60 BJ) Finish: Painted or E/P Tube dia.: 48.3mm Shoring Spigot Connector (SSC) & Pigtail M12x100 Bolt ,Nuts & washers Painted SSC with Washer 38x250x3 mm SSC with Washer 38x250x3 mm with Bolts Pigtail Pin Electroplated SSC with Washer 38x250x3 mm Base Plate Base Plate 12x12x0.57 MD (Dia-27 x2.0x100) Painted 0.77 Base Plate 12x12x0.78 HD (Dia-38 x3.8x100) Painted Scaffold Couplers Double Coupler 2.0"x1.5" (D/F) Swivel Coupler 2.0"x1.5" (D/F) Universal Jack Universal Jack-65cm-H-P Universal Jack-76cm-H-P...

Open the catalog to page 20

Finish: Painted Socket Base Adapter (SBA) SBA Painted SBA Painted SBA Painted Soket Base Adapter Finish: Painted GS Drophead Shorelok System (Ring Lock) | Load Bearing | Horizontal Formwork Wt. (kg)Code Wt. (kg)Code Finish: Mill Finish Moment of resistance:13.00 kN.m Area:18.87 cm Inertia xx:574.3 cm Inertia yy: 147.4 cm Section modulus Zxx: 75.36 cm Young’s Modulus 69000 N/mm Weight: 5.80 kg/m (with Timber) 5.05 kg/m (without Timber) Timber Wt.=0.75 kg/m Finish: Painted (IB) GS IB 170 cm Painted GS IB 150 cm Painted GS IB 140 cm Painted GS IB 120 cm Painted GS IB 110 cm Painted GS IB 100 cm...

Open the catalog to page 21

Horizontal Formwork | Load Bearing | Shorelok System (Ring Lock) Wt. (kg) Uniﬁed GR-Bracket with 1no.M12X100 and 2no.M16X150 Bolt & Nut - Painted Uniﬁed GR-Bracket with 1no.M12X100 and 2no.M16X150 Bolt & Nut - EP FGDBFP FGDBFE FGDBFG Wooden Plank (WP) (Timber Board) WP 38.0x225x1000 mm (Laminated) WP 38.0x225x1500 mm (Laminated) WP 38.0x225x2000 mm (Laminated) WP 38.0x225x2500 mm (Laminated) WP 38.0x225x3000 mm (Laminated) WP 38.0x225x3900 mm (Laminated) WP 38.0x225x3900 mm WP 38.0x225x3000 mm WP 38.0x225x2500 mm WP 38.0x225x2000 mm End Strip for Wooden Board Protection Marine Plywood 244x122...

Open the catalog to page 22