Frames for Propping, Shoring and Access
9Pages

{{requestButtons}}

Catalog excerpts

Frames for Propping, Shoring and Access - 1

SCAFFCO Formwork & Scaffolding

Open the catalog to page 1
Frames for Propping, Shoring and Access - 2

Horizontal Formwork | Load Bearing | Frame Shoring System Frame Shoring System is a completly toolless system with low number of components and bolt free connections that offers savings in time versus traditionally assembled scaffolding systems.

Open the catalog to page 2
Frames for Propping, Shoring and Access - 3

Frame Shoring System | Load Bearing | Horizontal Formwork Time saving: 30 % time saving compared with assembly of traditional scaffolding made of separate standards and ledgers. Low number of components: The shoring frames replace standards, ledgers and diagonal braces; therefore, saving time in assembly and dismantling due to reduced number of parts. Horizontal assembly on the ground: The shoring tower can be assembled on the ground and can be placed by a crane. Simple bolt free connection: Completely toolless system, the shoring frames can be joined with spigot connector. The frames will...

Open the catalog to page 3
Frames for Propping, Shoring and Access - 4

Horizontal Formwork | Load Bearing | Frame Shoring System Primary and Secondary Decking Primary Decking Secondary Decking

Open the catalog to page 4
Frames for Propping, Shoring and Access - 5

Frame Shoring System Frame Shoring System | Load Bearing | Horizontal Formwork

Open the catalog to page 5
Frames for Propping, Shoring and Access - 6

Frame Form Horizontal Brace Shorelok 60 - Base Jack & U-Head Adj. (5mm) Shoring Spigot Connector (SSC) & Pigtail M12x100 Bolt ,Nuts & washers Painted SSC with Washer 38x250x3 mm SSC with Washer 38x250x3 mm with Bolts Pigtail Pin Electroplated SSC with Washer 38x250x3 mm Shorelok 60 U-Head Adjustable (SL-60 UHA) Finish: Painted or E/P Tube dia.: 48.3mm Shorelok 60 - Base Jack & U-Head Adj. (4mm) t U-Head 10x20x30cm with Stiffeners Base 20x20cm with Stiffeners Shorelok 60 U-Head Adjustable (SL-60 UHA) Finish: Painted or E/P Tube dia.: 48.3mm BF-Cross Brace SS 030 cm - Painted SS 040 cm -...

Open the catalog to page 6
Frames for Propping, Shoring and Access - 7

Frame Shoring System | Load Bearing | Horizontal Formwork Wt. (kg) Code Finish: Varnished Yellow Supports are rounded at the end for damage protection.Web-three layer crosswise laminated solid timber panel. Weight: 5 kg per running meter moment of resistance: 6.80 kN.m Area:11.96 cm Inertia xx: 356 cm Inertia yy: 43.764 cm Section Modulud Zxx: 47.15 cm Toung’s Modulus: 69000 N /mm Weight: 3.95 kg/m (with Timber) 3.20 kg/m (without Timber) Timber W.=0.75 kgf/m Aluminum Beam (AB) T150 Steel Waling (SW) Finish: Mill Finish Moment of resistance:13.00 kN.m Area:18.87 cm Inertia xx:574.3 cm...

Open the catalog to page 7
Frames for Propping, Shoring and Access - 8

Horizontal Formwork | Load Bearing | Frame Shoring System Unified GR Bracket Wt. (kg)_Code _ M.D. Tube Unified GR-Bracket with 1no.M12X100 and 2no.M16X150 Bolt & Nut - Painted 3.65 Unified GR-Bracket with 1no.M12X100 and 2no.M16X150 Bolt & Nut - EP 3.65 Beam Frame H.D. Tube Beam Frame (P) Beam Frame (EP) Beam Frame (GI) Beam Fork Scaffold Tube (ST) Black Beam Fork (P) Universal Clamp (Aluminum to Soldier) H.D. Tube Universal Clamp EP (Aluminum to Soldier) Soldier Clamp H20 (Soldier to H20) Scaffold Tube (ST) GI 0.80 FSS99P033 M.D. Tube H20 Waler Clamp (H20 to Waler W12+W10) H20 Wteler Clamp...

Open the catalog to page 8

All SCAFFCO catalogs and technical brochures

  1. H20 Beam

    3 Pages

  2. Accessories

    11 Pages

  3. Table System

    11 Pages

  4. Cuplock System

    34 Pages

  5. EcoForm

    21 Pages

  6. Waling System

    18 Pages

  7. Soldier System

    26 Pages

  8. SPF 50

    24 Pages

  9. PAP

    10 Pages