SCAFFCO Formwork & Scaffolding

Formwork & Scaffolding Accessories Formwork & Scaffolding Accessories Formwork & Scaffolding Accessories

Formwork & Scaffolding Accessories Tubes & Fittings Accessories Sheet Metal Products Pressed Swivel Coupler (M.D.) Used to connect two scaffolding tubes at any angle. These are key components in the structure and must be load bearing. The body is firmly riveted to permit rotation but still ensures the minimum of further movement for maximum rigidity. Code Pressed Swivel Coupler (M. D.) Pressed Double Coupler (M.D.) Used to connect two scaffolding tubes at right angles. These are critical components in the scaffolding structure and must be load bearing to resist both slip and distortion. Pressed...

Formwork & Scaffolding Accessories DH Putlog Coupler This coupler is designed to secure putlogs and transoms to ledger. It also conforms to the requirements for bracing coupler as it is capable of taking much higher loading than normal putlog couplers. Code XFGPCDPE Band and Plate Coupler The original load bearing coupler for connecting two scaffold tubes at right angles. This is the only 90 degree coupler that can also bear scaffold tube in parallel. Code Band and Plate Coupler Joint Pin Used to connect two scaffolding tubes end to end. Fitted internally it expands to apply maximum grip against...

Formwork & Scaffolding Accessories Tubes & Fittings Accessories Drop Forged Products Drop Forged Swivel Coupler (H.D.) A one-piece load bearing coupler of rugged design incorporating captive “T” bolts for connecting two scaffold tubes at any angle. Code XFGCSD4848 Drop Forged Swivel Coupler (H. D.) Drop Forged Double Coupler (H.D.) A one-piece load bearing coupler incorporating captive “T” bolts used to connecting two scaffold tubes at right angles. Code Drop Forged Double Coupler (H. D.) Drop Forged Putlog Coupler A one-piece coupler for connecting transoms and putlog to ledgers. Code XFGCPD001...

Formwork & Scaffolding Accessories Tie Rod Threaded high tensile tie rod supplied in 6 m lengths and 17 mm diameter, black or galvanized. Formwork & Scaffolding Accessories Timber Waling Clamp & Universal Clamp Both devices used for soldier wall shuttering system. Waling clamp used to connect timber studs to the soldiers, while the Universal Clamp is used to fasten the aluminum studs to the soldiers. Wall formwork is easily done with these accessories. Timber Waling Clamp Universal Clamp Timber Waling Clamp Universal Clamp

Formwork & Scaffolding Accessories Soldier System Accessories Plastic Sleeve Acts as a spacer and allows the recovery of the tie rod by preventing contact with the concrete. Plastic Cone Located at the ends of the plastic sleeve, cone allows the tie rod to penetrate easily one side to another. Counter Plate A simple heavy duty reinforced plate 120 x120 x 8 mm. Counter Plate Water Stopper Cast element used as a connector between two tie rods, which prevents water seepage due to its central disk. Water Stopper Plastic Reducer Plastic Reducer Wing Nut Cast nut with lever arm action used counter...

Formwork & Scaffolding Accessories Scaffolding Accessories Ledger End (Drop Forged) Code XGSLEDF Formwork & Scaffolding Accessories Ledger End (Drop Forged) Bottom Cup Code XGSBCDF Bottom Cup Toe Board Clamp Code XFGTBC Toe Board Clamp Castor Wheel Castor Wheel 8” Code XEXCW002 Castor Wheel 8” with Adjustable Jack Castor Wheel

Formwork & Scaffolding Accessories Props Accessories Threaded Tube 60.3 mm Code XPRTT60P XPRTT60E Props Nut (Drop Forged) 60.3 mm Code XPRNUTD60 Props Nut (Drop Forged) 60.3 mm Rocking Push Pull Prop Base Code XFGRB001 Rocking Push Pull Prop Base Double Push Pull Prop Base Code XFGRB002 Double Push Pull Prop Base

Formwork & Scaffolding Accessories CupLock System Accessories Top Cup (Drop Forged) Code XGSTCDF Wedge Plate (Drop Forged) Code XGSWPDF Wedge Plate (Drop Forged) Formwork & Scaffolding Accessories