Access Scaffolding
26Pages

Access Scaffold System | H.D. Access Scaffold H.D. Access Scaffold Suitable for High Loads while Providing Versatile Access for Work at Maximum Building Heights

H.D. Access Scaffold | Access Scaffold System Cuplock System as Heavy Duty Access Scaffold Timber Board 38 mm thick and 225 mm nominal timber boards can be used in boarded lifts. One of the key strengths of the Cuplock System is the simplicity of the component range. Basic horizontals and verticals form the core of all structures. However, with the addition of a small number of special components, complex scaffolds can be constructed which safely address complex access requirements. It is reliable and safe on facades of various layout and height shapes. It is facilitated by external and...

Access Scaffold System | H.D. Access Scaffold Access Scaffold System | H.D. Access Scaffold Process of Erection and Dismantling is Fast and Simple

H.D. Access Scaffold | Access Scaffold System TIES: It is essential that scaffolds be tied to the building or suitable structure to prevent inward or outward movement of the scaffold. As such they provide stability and enable effective performance of the scaffold structure as it grows in height and length. As general rule, ties need to commence where the scaffold height exceeds 3 times its least width. Typically ties comprise scaffold tube connected to the Standards with right angled scaffold couplers. Care must be taken that ties do not obstruct clear access along the full length of the...

Access Scaffold System | H.D. Access Scaffold Access Scaffold System | H.D. Access Scaffold Safe Solution for working at heights

H.D. Access Scaffold | Access Scaffold System

Access Scaffold System | H.D. Access Scaffold Tying to Standards: Ties tubes must be connected to Standards and be parallel to short ledger (transoms) at a position adjacent to the junction of the Ledgers, with the following restrictions: (a) Within 300mm from the underside of the cup at the junction - connected to the front Standard with addition of a Check Coupler. (b) Further than 300mm from underside of the cup at the junction - Tie connected to both front and rear Standards. (c) If unable to connect to two Standards then reinforce front Standard for the full height of the lift with...

H.D. Access Scaffold | Access Scaffold System Working Loads of Access Scaffolds: Working load is the total load of all persons, equipment, tools, materials, transmitted loads, and other loads reasonably anticipated to be applied to a scaffold or scaffold component at any one time. There are three different types of scaffolds according to load (Light Duty Scaffolds, Medium Duty Scaffolds, and Heavy Duty Scaffolds as follows: 1. Light Duty Scaffolds: Designed and constructed to carry a working load of 1.2 kN/m2 2. Medium Duty Scaffolds: Designed and constructed to carry a working load of 2.4...

Access Scaffold System | H.D. Access Scaffold Safe and Versatile Mobile Towers and Scaffold Towers with Cuplock System Square or rectangular access towers can be erected with standard Cuplock system components using standard base jack or adjustable castor wheels for full mobility. The working platform can be formed using either scaffold boards or battens. When scaffold boards are used, intermediate transoms will be necessary if the width of the tower is greater than the safe span of the boards. The maximum height of a free-standing mobile tower for use internally is 3.5 times the minimum...

H.D. Access Scaffold | Access Scaffold System Castor Wheel Scaffold Tower H.D. Access Scaffold 10.9m Platform For these cases the stability of the tower must be increased by: i) Using Stabilizers ii) Weighting the base of the Tower iii) Tying the tower into a stable structure

Access Scaffold System 1 H.P. AccessScaffold staittose Tower oHers o foil «■>»* «■ **"» Sol'rt““S for Temporary Access

H.D. Access Scaffold | Access Scaffold System Staircase Tower provides a safe access solution for various construction purposes. Staircase towers generate significant time savings for everyone on site. There are two basic staircase options in the Cuplock System range for light, medium duty and heavy duty requirements. The scaffold system will provide the main structure for the tower. The staircase tower offers a stable, rigid structure designed with a key emphasis on user safety. Board landing platforms with steel or timber battens can be used. Stairways are rigid and provide firm, non-slip...

Access Scaffold System | H.D. Access Scaffold

H.D. Access Scaffold | Access Scaffold System

Access Scaffold System | H.D. Access Scaffold Staircase Tower with Shorelok System Shorelok staircase towers are ideally suited for all construction sites requirements. They are particularly fast and cost-effective to install and are robust enough for the toughest jobs.

H.D. Access Scaffold | Access Scaffold System

Access Scaffold System | M.D. Access Scaffold M.D. Access Scaffold The Easiest Solution for Construction

M.D. Access Scaffold | Access Scaffold System H Frames (Italian System) High quality M.D. external system is designed to be easily erected and dismantled without help from professionals. The “H” frame, or vertical member, has welded square or round pins on top for ease of connection. This allows for erecting the frames faster and to any height with maximum safety and stability. The system is designed not to include any loose fittings inside. The external systems have a three-way support to hold greater loads and ensure greater stability. Italian System Italian System Horizontal Brace...

Access Scaffold System | M.D. Access Scaffold H Frames (Korean System) The Korean style exterior system, otherwise known as beatty and load tower type, allows working on the interior as well as the exterior of civil construction works. Its vertical member has an arched construction with a height of 1.70 m and a width of 1.22 m, therefore allowing for a greater area on top of the work platform. The 2.20 m long cross braces safely hold the two frames of the system together. Cross Brace Korean System Frame