Via Reggio Calabria,13 - Cascine Vica Rivoli (TO) Italia Tel: (+39) 011.959.16.01 Fax: (+39) 011.959.29.62 AXIAL FANS USE The EP axial aspirator is suitable for the transport of dusty air up to a maximum temperature of 50 degrees C. Due to its plastic structure and the fan wheel, which is made entirely in resin, it is particularly suitable for use in premises with a high concentration of corrosive pollutants, such as cowsheds, breeding sheds, industrial units, etc. CHARACTERISTICS OF CONSTRUCTION The fan wheel is made entirely in reinforced glass fibre resin; the high-yield wingshaped blades can be oriented when stationary. The support structure is made in resin moulded in a single element The protective grid conforms to safety regulations. The single-phase or three-phase airtight motor conforms to UNEL-MEC standards. ACCESSORIES Gravity shutter: The flap-bearing structure is made in resin and moulded as a single piece. The aluminium flaps are fixed onto to stainless steel rods with nylon bushings and self-locking rings. The flaps are automatically opened by the airflow generated by the ventilator. Speed adjustment switches: It is possible to install a speed adjustment switch on ventilators with single-phase motors in order to adjust capacity. Visita il Ns. sito WWW. SAVIOCLIMA.IT o contattaci via E-mail [email protected]