Sub-vertical Mechanical Perforated Screens GVS
Sub-vertical Mechanical Perforated Screens GVS
- Perforation sizes range from 3mm to 6mm.
- Channel width varies from 400mm to 2,000mm.
- Incline angle is typically 75 degrees, adjustable up to 90 degrees with an optional goose neck.
- Materials used include hot dip galvanized steel and stainless steel (304L/316L).
- Easy replacement design for wipers, blades, and brushes.
- Recessed guide channels for drive chains, eliminating the need for lower sprockets and bearings.
- Reduced service requirements as the screen does not need to be removed from the channel.
- Standard screening zone height is 1 meter, with channel heights ranging from 1 to 10 meters.
- Installed power varies from 0.75 kW to 1.5 kW depending on the model.
- Flow rates range from 20 m3/h to 420 m3/h, depending on the model and perforation size.
Catalog excerpts
Waste Water Treatment Sub-vertical Mechanical Perforated Screens GVS Rights reserved to modify technical specifications. DS.GVS.EN.October 2015.R00 GVS Sub-vertical Mechanical Perforated Screens consist of a robust steel frame and a perforated plate filter varying according to the screening efficiency required. GVS screens, which are equipped with brushes and wiper blades, are suitable for fine screening of sewage in both municipal and industrial plants, as well as, in particular, for process water of industrial processing plants. Waste water flows into the upstream end of the unit where screenings are captured on a perforated plate filter. Chain-driven brushes and wiper blades clean the perforated plate filter conveying at the same time solids to the discharge point. Material is removed from the rakes by a wiper and discharged into a dumpster, conveyor or compactor. Benefits 33 Wipers, blades and brushes bolted on the rake mechanism; 33 Easy replacement design; 33 Recessed guide channels for drive chains; 33 Lower chain guide with no moving parts; 33 No lower sprocket, no bearings; 33 Reduced service requirements (no need to remove screen from channel). www.savi-water.com www.wamgroup.com
Open the catalog to page 1
GVF - SUB-VERTICAL MECHANICAL PERFORATED SCREENS - FLOW RATES X 3mm ~ 6mm perforation X 4 or more cleaning blades and wipers depending on screen height X Channel width: 400 ~ 2,000 mm X 75-degree incline angle X Material: hot dip galvanised steel, 304 L / 316 L SS X Incline angle other than 75 degrees up to 90 degrees with goose neck (optional) X Control panel (optional) Fixed parameters: screening zone height: 1 m Screen slope: 75° Head loss: 300 mm Values related to municipal waste water, screen partially occluded (30%) Overall Dimensions ▼ DS.GVS.EN.October 2015.R00 Rights reserved to modify...
Open the catalog to page 2All SAVI srl catalogs and technical brochures
Sludge Thickeners ISP2 Pages
- Solids separator
- Centrifugal classifier
- Separator for the recycling industry
- Trash compactor
- Fixed waste compactor
- Cyclone classifier
- Bar screen
- Sand separator
- Thickener
- Sludge treatment thickener
- Clarifier
- Fine screen
- Screw waste compactor
- Drum screen
- Screw screen
- Circular separator
- Circular clarifier
- Coarse screening screen
- Processing workstation