SILOX PLASTER

SILOX PLASTER

Product catalog summary
Specifications
Specific weight at 20°C is 1.77 ± 0.05 kg/lt. The average grain size is 1.2 mm. Consumption varies between 2.0 - 2.5 lt/m² depending on thickness. The product should be diluted with a little water to achieve the desired consistency. It has a water permeability rating of W3 and a water vapor permeability of V1. The reaction to fire is classified as Euroclass C-s2, d0. Adhesion by direct traction is ≥ 0.3 MPa, and thermal conductivity is 0.83 W/mK. VOC content is less than 30 g/lt.
Description
SILOX PLASTER is a fiber-reinforced coating similar to civil plaster, intended for external surfaces and refinishing nanotechnological skim coats. It is acrylic-siloxane based with an opaque appearance and is part of the Certified Manti Ceramic Insulation Cycle. It is primarily used on building exteriors and is available in standard colors WHITE or RAL, with custom colors available on request.
Application Methods
The surface must be clean and free of loose parts, oil, grease, wax, and old flaking paint. Use Gripper Finer and wait 24 hours for drying. Apply with a metal spatula and rework with a plastic spatula or trowel in circular motions. Work wet-on-wet to avoid shading and use material from the same batch to prevent color differences. Application temperature should be between +5°C and +30°C. Mix with a low-speed agitator to avoid compromising functionality.
Storage Stability
The product is guaranteed for one year if stored in original packaging in a dry, protected place at temperatures between +5°C and +35°C. It is packaged in 25 kg pails on pallets of 33 pails.
Additional Information
All information is based on practical experience and laboratory testing. The customer must verify product suitability for intended use. The manufacturer is not responsible for incorrect applications. This sheet replaces previous versions and data may change without notice.
See more

Catalog excerpts

SILOX PLASTER-1

SILOX PLASTER Specific weight (at 20°C) (A + B): 1.77 ± 0.05 kg/lt Grain size: average 1.2 mm Permeability to water: W3 Water vapour permeability: V1 Reaction to fire: Euroclass C-s2, d0 Adhesion by direct traction: > 0.3 MPa Thermal conductivity: 0.83 W/mK VOC content less than: 30 g/lt All information contained in this technical sheet is based on the best practical experience and laboratory testing. The customer is responsible for verifying that the product is suitable for the intended use. The manufacturer declines all responsibility for results deriving from incorrect applications. This sheet replaces and voids all previous sheets. The data may vary at any time. The manufacturer is not obligated to give prior notice. Via Andrea Doria 56, 20124 Milano (MI) www.manti-ceramic.com [email protected]

 Open the catalog to page 1

All Savenergy.it catalogs and technical brochures

  1. MARIS TECH

    1  Page

  2. AES TECH

    1  Page

  3. HUMIBLOCK

    2  Pages

  4. CAL PLASTER

    1  Page

  5. AQUAPROOF

    1  Page

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.