1. Catalogs
  2. Savenergy.it
  3. PHOTOCAT PAINT

PHOTOCAT PAINT

PHOTOCAT PAINT

Product catalog summary
Description: Photocat Paint is a photocatalytic nanotechnological coating that is protective, transparent, anti-pollution, anti-odour, reduces bacteria growth, and is self-cleaning. It contains suspended nanoparticles and modified colloidal resins in aqueous dispersion.
Main Uses: Suitable for a wide range of porous and non-porous surfaces including concrete, fibre cement, bricks, stone, masonry, metal structures, wood, and painted surfaces both indoors and outdoors. Surfaces must be cleaned and restored if deteriorated. Complies with European Directive 2004/42/CE on VOC emissions.
Application Methods: Can be applied using a brush, roller, or conventional sprayer. The product is ready to use without dilution, with one or two layers recommended based on substrate absorption.
Characterisation: Evaluates NO and NOX conversion over 180 minutes with a photocatalytic degradation rate of 12,000 μgm-² h-1. NO conversion is approximately 86% and NOX is 60% under specific conditions.
Safety Instructions: Keep out of reach of children. In case of eye contact, rinse with water and consult a doctor. Use protective clothing, gloves, and goggles. Store in a dry place at room temperature and protect from frost.
Specifications: Specific weight is 1.15 ± 0.05 kg/lt. Dry residue is 30% by weight. Viscosity is 55 KU at 25°C. Humid friction resistance is Class 1. Water vapour permeability is Sd=<0.015m. Theoretical consumption varies by substrate type.
Warnings: Do not apply below 5°C. The product has unlimited pot life and is dry to the touch in 25-35 minutes. Overapplication is possible after 6-8 hours.
Additional Information: The product is ISO 9001 certified and classified as non-hazardous. All data is based on laboratory tests and practical experience. The manufacturer is not responsible for incorrect applications.
See more

Catalog excerpts

PHOTOCAT PAINT-1

PHOTOCAT PAINT SPECIFICATIONS Specific weight (at 20°C) (A + B): 1.15 ± 0.05 kg/lt - UNI EN ISO 1475 Dry residue: 30% in weight - UNI EN ISO Viscosity: 55 at 25°C KU Water vapour permeability: Sd=<0.015m - DIN EN ISO 7783-2 Theoretical consumption PER COAT: Concrete 0.120 Prepainted sheet 0.080^0.120 kg./m2 Wood panels 0.120^0.150 kg./m2 Painted substrate 0.100^0.120 kg./m2 Fibre cement 0.120^0.150 kg./m2 Elongation at break: 200% (UNI EN 12311-2) (NOTE the values obtained are results of laboratory tests at +20°C and 65% R.H.) All information contained in this technical sheet is based on the best practical experience and laboratory testing. The customer is responsible for verifying that the product is suitable for the intended use. The manufacturer declines all responsibility for results deriving from incorrect applications. This sheet replaces and voids all previous sheets. The data may vary at any time. The manufacturer is not obligated to give prior notice. Via Andrea Doria 56, 20124 Milano (MI) www.manti-ceramic.com [email protected]

 Open the catalog to page 1

All Savenergy.it catalogs and technical brochures

  1. MARIS TECH

    1  Page

  2. AES TECH

    1  Page

  3. HUMIBLOCK

    2  Pages

  4. CAL PLASTER

    1  Page

  5. AQUAPROOF

    1  Page

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.