
The product is a water-based, solvent-free, thin-layered thermal protective coating containing ceramic nanoparticles. It offers significant thermal insulation and waterproofing, reducing thermal load and preventing mold and algae formation. It is environmentally friendly and does not require a primer on most substrates.
Designed for marine applications, including boats, yachts, ferries, and ships, the coating provides effective thermal and acoustic insulation. It is also suitable for other industrial applications and can be applied on irregular surfaces.
Apply using a piston-type airless sprayer, such as the Graco Mark VII HD, in multiple coats (one to four). Mix with a low-speed electric mixer for at least 3 minutes before application. Recommended pressure is 180–200 bar with LP 517 or LP 617 nozzles. Avoid application below +5°C and above 80% relative humidity. Protect from rain for 48 hours post-application. Maximum substrate temperature is 180°C.
Adhesion tests show no loss of adhesion or visible signs of separation. Complete polymerization occurs within 30 days. The product is ISO 9001 certified and MED - SOLAS - IMO - MSC certified for marine applications.
12 months from the production date.
MARIS TECH Nanocomposite semi-liquid thermal insulation Thermal conductivity: Ad = 0,0010 W/mK Thermal reflectance (SR %) (ASTM C1549): 91.0 Thermal emissivity (IE %) (EN 15976): 90.0 Thermal reflectance index (SRI %) (ASTM El 980): 115.3 Ph: 8,5 (± 0,5) Finish/color: White (can be colored with pastel colors) Viscosity: 7500 cps Density: 370 kg/m3approx. Reaction to fire: Euro Class A - MED Certification Water permeability w: 0.08 kg/mh (E 1062-3) Pull-off test: > 2 on substrate 0.55 ± 0.10 /mm Iyer over layer (ASTM 4541) Drying time for each coat: 8 h All information contained in this technical sheet is based on the best practical experience and laboratory testing. The customer is responsible for verifying that the product is suitable for the intended use. The manufacturer declines all responsibility for results deriving from incorrect applications. This sheet replaces and voids all previous sheets. The data may vary at any time. The manufacturer is not obligated to give prior notice. Via Andrea Doria 56, 20124 Milano (Ml) www.savenergy.it
Open the catalog to page 11 Page
1 Page
1 Page
1 Page
2 Pages
1 Page
1 Page
1 Page
1 Page
2 Pages