Description: HUMIBLOCK is a white, fibre-reinforced skim coat with a granulometry not exceeding 600 microns. It is non-organic, odourless, and designed for refurbishment, dehumidification, and waterproofing of masonry surfaces. Suitable for both indoor and outdoor use, it can handle positive and negative hydrostatic thrust. The product is effective against capillary rising damp, infiltrations, and condensation, and it prevents mould formation. It is applied with a spatula and cannot be used with a brush or roller.
Main Uses: HUMIBLOCK is used for waterproofing concrete and masonry structures, including tanks, canals, pools, and purifiers. It is suitable for continuous water contact and can be applied in high humidity and closed spaces.
Surface Preparation: Surfaces should be washed and sealed if necessary. Irregular surfaces should be evened out with specific mortars. Absorbent surfaces should be kept damp until application. Protective measures are required for floors and foundation walls.
Application Methods: Mix the powder with water to achieve a pasty consistency suitable for spatula application. The product requires at least two coats with a reinforcement mesh in between. It should be applied within 20 minutes of mixing, and additional water should not be added to extend use time.
Specifications: The product has a specific weight of 1.3 kg/lt at 20°C and a skim coat weight of 1.7 ± 0.1 kg/lt. It adheres to concrete with a strength greater than 2 Mpa and has a compressive strength of over 25 Mpa. The product is vapour permeable and water impermeable, with a pH greater than 12.
Application and Operating Temperature: The product should be applied and operated at temperatures between +5°C and +35°C.
Reaction Times: Preparation time is 30-45 minutes, dry to the touch in 4 hours, and completely hardened in 24 hours. Coverage is 3-5 kg/m2 depending on surface irregularity.
Storage Stability: The product is stable for 12 months if stored in its original packaging in a dry, protected place at temperatures between +5°C and +30°C.
Packaging: Available in 20 kg plastic pails on pallets of 600 kg.
Disclaimer: The information is based on practical experience and laboratory testing. The customer must verify the product's suitability for their intended use. The manufacturer is not responsible for incorrect applications.