GRIPPER FINER

GRIPPER FINER

Product catalog summary
Description: The Gripper Finer is a breathable resin-based adhesion promoter with acrylic binders modified with organosilanes in an aqueous solution. It includes nanotechnological products to enhance structure and resistance, ideal for use in heat insulating skim coat cycles and as a primer for Savenergy plaster.
Main Uses: It is used for impregnating powdery or damaged internal surfaces and as a primer coat for external surfaces exposed to rising damp or weather conditions.
Application Methods: Surfaces must be dry and in good condition. Clean surfaces by pressure washing or sandblasting before application. Homogenize the product with a mechanical agitator. For roller or brush application, dilute with water at a 1:4 ratio. For airless spray systems, dilute at a 1:8 ratio. Adjust dilution based on surface conditions.
Warnings: Apply at temperatures between +5°C and +35°C. Store in original packaging in a dry place at temperatures between +5°C and +35°C. The product is stable for one year under these conditions.
Specifications: Specific weight at 20°C is 1.05 ± 0.05 kg/lt. Volume of solid content is 49% ± 1%. Concrete adherence is greater than 1 breakage A/B MPa according to UNI EN 1542. It has high UV resistance (ASTM G53) and a water vapour transmission of 1*104 μ (UNI EN 7783-2012). It shows no swelling, cracking, or scaling after 2000 hours of artificial weathering (UNI EN 1062 - 11). Volatile organic matter content is less than 2 g/lt. Theoretical consumption is 0.100–0.120 kg/m2. Drying time at 25°C and 65% RH is 3-4 hours.
Additional Information: The product is available in 20 lt pails and is semi-transparent. For safety information, consult the safety data sheet. The manufacturer is ISO 9001 certified and located at Via Andrea Doria 56, 20124 Milano (MI).
See more

Catalog excerpts

GRIPPER FINER-1

GRIPPER FINER Specific weight at 20°C: 1.05 ± 0.05 kg/lt Volume of solid content: 49% ± 1% Concrete adherence: > 1 breakage A/B MPa - UNI EN 1542 UV resistance: high (ASTM G53) Water vapour transmission: 1*104 p - UNI EN 7783-2012 Resistance to artificial weathering after 2000 h: no swelling, cracking or scaling - UNI EN 1062 - 11 Volatile organic matter content: < 2 g/lt Theoretical consumption: 0.100-0.120 kg/m2 Drying time at 25°C and 65% RH: 3-4 hours All information contained in this technical sheet is based on the best practical experience and laboratory testing. The customer is responsible for verifying that the product is suitable for the intended use. The manufacturer declines all responsibility for results deriving from incorrect applications. This sheet replaces and voids all previous sheets. The data may vary at any time. The manufacturer is not obligated to give prior notice. Via Andrea Doria 56, 20124 Milano (MI) www.manti-ceramic.com [email protected]

 Open the catalog to page 1

All Savenergy.it catalogs and technical brochures

  1. MARIS TECH

    1  Page

  2. AES TECH

    1  Page

  3. HUMIBLOCK

    2  Pages

  4. CAL PLASTER

    1  Page

  5. AQUAPROOF

    1  Page

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.