AQUAPROOF

AQUAPROOF

Product catalog summary
Description: The document describes a waterproofing elastomeric resin coating made with modified acrylic resins. It forms a matt film that is resistant to aggressive atmospheres, waterproof yet permeable to water vapor.
Main Uses: This coating is specifically used for waterproofing surfaces with crack-bridging capacity on concrete structures that are cracked or at risk of cracking. It is suitable for protecting and weatherproofing concrete in bridges, viaducts, and similar structures, as well as ceramics, screeds, and plasters. It is also applicable for solar slabs, terraces, flat roofs, saunas, bathrooms, and laundries, and is effective in aggressive industrial atmospheres.
Application Methods: Surfaces must be dry and in good condition before application. The product should be homogenized and diluted with water, and can be applied using a long-pile roller, brush, or airless sprayer. For horizontal applications, apply in two thin coats; for vertical applications, allow the first coat to dry before applying the second.
Warnings: The application temperature should be between +5°C and +35°C, with an operating temperature of +20°C to +50°C. Reaction times at 20°C and 50% RH include a pot life of unlimited duration, dry to touch in 3 hours, and complete hardening in 24 hours.
Storage Stability: The product is guaranteed for one year if stored in its original packaging in a dry, protected place at temperatures between +5°C and +35°C.
Specifications: The specific weight is 1.33 ± 0.5 kg/lt, pH is 9 ± 0.5, solid contents are 65% ± 2%, and viscosity is 30,000 CPS at 30°. It has high UV resistance, absolute impermeability to water, and excellent crack bridging capacity of 2.28 mm.
Additional Information: The document emphasizes that the customer is responsible for verifying the product's suitability for their intended use, and the manufacturer is not liable for incorrect applications. The product is ISO 9001 certified.
See more

Catalog excerpts

AQUAPROOF-1

mfiriTr AQUAPROOF Speci ic weight (at 20°C) (A + B): 1.33 ± 0.5 kg/lt PH: 9 ± 0.5 Water vapour permeability: Sd < 0.3 m per 100 p Carbon dioxide permeability: Sd > 80 m per 100 p Impermeability to water: absolute (UNI 8202) Theoretical consumption: 2,0 kg/m2 Elongation at break: 200% (UNI EN 12311-2) Elastic recovery: 100% Crack bridging capacity: 2.28 mm All information contained in this technical sheet is based on the best practical experience and laboratory testing. The customer is responsible for verifying that the product is suitable for the intended use. The manufacturer declines all responsibility for results deriving from incorrect applications. This sheet replaces and voids all previous sheets. The data may vary at any time. The manufacturer is not obligated to give prior notice. Via Andrea Doria 56, 20124 Milano (MI) www.savenergy.it

 Open the catalog to page 1

All Savenergy.it catalogs and technical brochures

  1. MARIS TECH

    1  Page

  2. AES TECH

    1  Page

  3. HUMIBLOCK

    2  Pages

  4. CAL PLASTER

    1  Page

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.