AES TECH

AES TECH

Product catalog summary
Product Features
  • Packaging: 16 liters
  • Coverage: 1 liter per 1 sq.m at 0.75 mm thickness
  • Thickness Range: 1.0 - 4.0 mm
  • Thermal Conductivity: 0.0010 W/mK
  • Thermal Reflectance: 84.3% (ASTM C1549)
  • Thermal Emissivity: 87.4% (EN 15976)
  • Thermal Reflectance Index: 105.0% (ASTM E1980)
  • pH Level: 8.5 (± 0.5)
  • VOC Content: < 0.003 μg/lt
  • Finish/Color: White, can be colored with pastel colors
  • Density: 370 kg/m³
  • Reaction to Fire: Euro Class A - fireproof
  • Liquid Water Permeability: 0.08 kg/m²h1/2 (EN 1062-3)
  • Pull-off Test: >2 N/mm² to substrate; 0.55 ± 0.10 N/mm² between layers (ASTM D4541)
  • Drying Time: 8 hours per coat
General Information

This product is a water-based, solvent-free thermal coating similar to paint, containing ceramic nanoparticles for thermal insulation. It reduces thermal load through heat reflection and provides waterproofing. It adheres well to various surfaces, reducing thermal bridges and mold formation. Environmentally friendly, it does not produce hazardous waste.

Usage

Designed for industrial applications on pipes, containers, silos, metal equipment, tanks, and cold storage rooms. It offers effective, long-lasting thermal insulation without maintenance, with a maximum service temperature of 240°C.

Application

Apply using a Graco Airless piston sprayer Mark VII HD, following the installation manual. For small areas, a brush or roller can be used. Avoid application below +5°C or above 80% humidity, and protect from rain for 48 hours. No primer is needed on most substrates.

Special Remarks

Adhesion tests show no loss of adhesion or visible signs of separation. Complete polymerization occurs within 30 days. The product is ISO 9001 certified.

Disclaimer

All information is based on practical experience and laboratory testing. The customer must verify product suitability for intended use. The manufacturer is not responsible for incorrect applications. Data may change without notice.

See more

Catalog excerpts

AES TECH-1

Nanocomposite semi-liquid thermal insulation for industrial applications on metals, plastics, membranes and wood Thermal conductivity: Ad = (HotBox Test) 0,0010 W/mK Thermal reflectance (SR %) (ASTM C1549): 84,3 Thermal emissivity (IE %) (EN 15976): 87,4 Thermal reflectance index (SRI %) (ASTM E1980): 105,0 Ph: 8,5 (± 0,5) Finish/color: White (can be colored with pastel colors) Density: 370 kg/m3 approx. Reaction to fire: Euro Class A - fireproof Liquid water permeability: 0,08 kg/m2h1/2 (EN 1062-3) Pull-off test: >2 N/mm2 to substrate; 0.55 ± 0.10 N/mm2 between layers (ASTM D4541). Drying time of each coat: 8 h All information contained in this technical sheet is based on the best practical experience and laboratory testing. The customer is responsible for verifying that the product is suitable for the intended use. The manufacturer declines all responsibility for results deriving from incorrect applications. This sheet replaces and voids all previous sheets. The data may vary at any time. The manufacturer is not obligated to give prior notice. Via Andrea Doria, 56 20124 Milano (ItalY)

 Open the catalog to page 1

All Savenergy.it catalogs and technical brochures

  1. MARIS TECH

    1  Page

  2. HUMIBLOCK

    2  Pages

  3. CAL PLASTER

    1  Page

  4. AQUAPROOF

    1  Page

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.