SAV Magnetic Workholding - 168 Pages

Add to MyDirectIndustry favorites
SAV Magnetic Workholding

Catalog excerpts

M AG N E T I C WORKHOLDING WORKHOLDING WITH PRECISION AND PERFORMANCE

 Open the catalog to page 1

CHAPTER OVERVIEW POLE PITCH MACHINING OPERATION* Permanent Magnetic Chucks 220.30 magnet pallet power magnet pallet standard pallet standard pallet MAGNETIC TOMBSTONES AND MAGNETIC VERTICAL CHUCKS permanent magnetic 242.90 1,9 mm vertical chuck 242.91 magnetic tombstone PERMANENT MAGNET CHUCKS, RECTANGULAR 243.01 fine transverse poles extreme high holding force enhanced holding force PERMANENT CIRCULAR MAGNETS, NEODYMIUM CIRCULAR MAGNETS AND LAMINATED TOP PLATES 244.02 parallel poles with enhanced magnet system for circular magnetic chucks parallel poles parallel poles parallel poles...

 Open the catalog to page 2

Product Applications HSC machining with magnetic pallet SAV 220.31 Spark-erosion with Neodymium circular magnet. Circular grinding with permanent circular magnetic chuck. In this application upto 300 different workpieces can be machined using 4 sets of pole raisers. PERMANENT MAGNETS DEVELOPED WITH THEIR APPLICATION IN MIND Permanent magnetic beam with high-energy magnetic system and mechanical actuation with roller bearings. With magnetic isolated stop for grinding of workpieces and 20° angle. SAV Workholding and Automation • www.sav-workholding.com

 Open the catalog to page 3

Product Applications SAV-PALLET SYSTEMS Permanent magnet chucks With reference system and flushing channels. We supply clamping devices for EDM operations with all required adaptations. Permanent magnet chucks With reference system for use in a dielectric. The workpieces are set down away from the machine and the position measured. SAV-AUTOMATION SOLUTIONS SAV Spann-Automations- Normteiletechnik GmbH • www.sav-spanntechnik.de

 Open the catalog to page 4

Magnet Pallet Transverse pole pitch P = 2 mm Use: For use with zero point clamping systems. Adaptable to the majority of systems. Switchable Weight sections in kg * Dimension C is a guideline value and can be determined exactly using the reference system. Technical Specifications: - Parallelism: < 0.01 mm - Can be executed with threaded holes for side or angled stops - Magnetic field height: 4 mm - Pole plate wearing limit: 3 mm - Holding force: 80 N/cm2 - Pole pitch: 1.9 mm Material: Aluminium base with St 37 / stainless steel (V4A) Pole pate Ordering example: Magnet Pallet SAV 220.30 -...

 Open the catalog to page 5

PERMANENT MAGNET PALLET Transverse pole P = 15 mm Use: To clamp medium-size and large parts in grinding, milling and EDM operations. Adaptable to the majority of zero point clamping systems. Pole pitch steel/brass: 11 / 4 mm Nominal holding force: 130 N/cm2 Magnetic field height: 6 mm Pole plate wear limit: 6 mm Re-machining of the bottom face: up to 12 mm Parallelism: 0.03 mm C* 63,5 63,5 63,5 * Exact dimension is determined using the reference system. Ordering example: Permanent Magnet Pallet Ordering key Technical Specifications: - Aluminium housing, for attachment or installation -...

 Open the catalog to page 6

Permanent Magnetic Vertical Chuck With fine transverse pole pitch P = 1.9 mm Use: Primarily for horizontal machining of workpieces. Features: T-section block made from St 52-3 and supplied complete with permanent magnetic chuck SAV 243.01. Laminations 0.5 mm brass / 1.4 mm steel. The T-section can also be supplied with other permanent, electro or electro-permanent chucks. 0.005 / 100 mm 80 N/cm2 6 mm 8 mm Other sizes available on request. Parallelism and angularity: Nominal holding force: Magnetic field height: Pole plate wearing limit: MAGNETIC TOMBSTONES Precision milled workholding...

 Open the catalog to page 7

Permanent Magnetic Chuck With fine transverse pole pitch P = 1.9 mm Use: For small, medium and large workpieces. Features: Uninterrupted transverse pole arrangement. Constant holding force over the entire polesurface area and along the side faces. Laminations 0.5 mm brass / 1.4 mm steel. Nominal holding force: 80 N/cm2 Magnetic field height: 6 mm Pole plate wearing limit: 8 mm Permanent Magnetic Chuck With fine transverse pole pitch P = 1.9 mm Use: Very suitable for thin parts. Features: Extremely low height. ON-OFF switching from above. Laminations 0.5 mm brass / 1.4 mm steel. Flushing...

 Open the catalog to page 8

Neodymium Magnetic Chuck With transverse pole pitch P=6 mm neodymium-iron-boron magnets, extremely high holding force Use: For workpieces that are particularly difficult to clamp, such as ferrotic and hard metals containing cobalt, as well as very small workpieces. Application: Suitable for grinding of workpieces that are particularly difficult to clamp magnetically and for hard milling. Features: developed construction. Stable all-steel body. ON-OFF control on both end faces. Larger models - with power-operated switching mechanism - available on request. Laminations 4 mm St and 2 mm cast...

 Open the catalog to page 9

Permanent Magnetic Chuck With transverse pole pitch, P = 15 mm, neodymium-magnets, enhanced holding force Use: Heavy machining, such as milling and planing. The dense, concentrated magnetic field enables it to be used for small, medium and large workpieces, including those with rough or uneven surfaces. The magnetic field is without any stray fields, preventing magnetization of the tool. Features: Exceptionally strong neodymium magnetic system. ON-OFF control by means of hand lever. In the OFF position, a weak opposing field eases the removal of the workpiece. The magnets are equipped with...

 Open the catalog to page 10

Permanent Magnetic Circular Chuck With parallel pole arrangement, enhanced magnetic system Magnetic field height: 10 mm Pole plate wearing limit: 8 mm Pole pitch Switching positions Features: Exceptional strong magnetic field. Concentric grooves simplify the centring of the workpiece. A centre drilling of up to diameter E is permissible, depth of drilling must not exceed 8 mm for A = 100 to 200 mm and 15 mm for A = 250 to 500 mm. Also available with flange (see SAV 248.90 to 248.94). Nominal holding force: 140 N/cm2 (A= 200 to 500 mm) 70 N/cm2 (A= 100 to 160 mm) Ordering example: Permanent...

 Open the catalog to page 11

Permanent Magnetic Circular Chuck With parallel pole pitch P = 7 mm, flat edition Use: Small and medium-sized workpieces. Features: Special magnetic configuration enabling the maximum holding force to be reached with workpieces as thin as 1 mm. ON-OFF control by means of a detachable socket wrench (radial adjustment). Available with flange on request (see SAV 248.90 to 248.94). 100 N/cm2 6 mm 3 mm Nominal holding force: Magnetic field height: Pole plate wearing limit: M5 Ordering example: Permanent Magnetic Circular Chuck SAV 244.03 - 150 SAV - No. Ordering key - A Permanent Magnetic...

 Open the catalog to page 12

All SAV Spann- Automations- Normteiletechnik GmbH catalogs and technical brochures

  1. Rail Milling

    6 Pages