PRECISION SINE TABLES Swivelling around longitudinal and transverse axis DESIGN Swivelling around longitudinal and transverse axis. Sine table base unit made of steel. Hardened, burnished and precision-ground. Swivel plate designed with tapped holes M8 (G). From size 400 x 200 mm available with T-grooves (T) (subject to a surcharge). Mechanical adjustment gear alternatively available (subject to a surcharge.) This increases the height by approx. 40 mm at 0° swivel angle for each axis. Delivered in a wooden storage box, up to and including size 400 x 200 mm. With sine table with degrees/minutes in mm. TECHNICAL DATA Angle accuracy: ±5 s Plane parallelism: ±0.005/100 mm Gauge block at 0°: 3 mm Swivelling range, long axis: 0° to 45° Swivelling range, short axis: 0° to 30° APPLICATION The angles are determined using the gauge blocks using the sinusoidal principle. Suitable for workpieces with two work levels. Clamping is achieved with a fastening brace at the side and the upper bearing shells. B C Pole plate for version with T-grooves (T) from size 400 Pole plate for design with tapped holes (G) ORDERING EXAMPLE Designation Precision sine table