PI 62
23Pages

{{requestButtons}}

Catalog excerpts

PI 62 - 1

Product information PI 62 Disk-type tool turret with integrated tool direct drive series

Open the catalog to page 1
PI 62 - 3

You can request projection instruction PA 62. Note: The information contained in this Product Information is in conformity with knowledge at the point of printing. We reserve the right to perform modifications within the framework of continuous further development.

Open the catalog to page 3
PI 62 - 4

Disk-Type Tool Turret Series 0.5.437.2xx / .6xx witht Tool direct drive Description These turrets are suitable for use on high-capacity turning machines for forward as well as equipollent reverse machining. They are equipped with all of the features and functions of modern high-performance and high-capacity tool turrets. Their robust design and short switching times mean they are also very well suited for heavy-duty use in series manufacture and very suitable for highest productivity for milling and drilling Features Two-motor Technology One inetegrated indexing drive and the tool drive...

Open the catalog to page 4
PI 62 - 5

Turret housing Tool disk Motor for tool drive Connection cooling lubricant Connection hydraulic turret lock and unlock Motor for indexing drive Connection elektric Connection air sealing turret Connection air sealing driven tool Connection cooling motor Connection hydraulic engaged and disengaged1)

Open the catalog to page 5
PI 62 - 6

Series 0.5.437.2xx / .6xx Technical data indexing drive Technical data indexing drive Size Series Disk-type tool turret 0.5.437.2xx Number of switching positions Admissible tangential load (turret locked)1) Admissible mass moment of inertia of tools1)2) with tool disk and holder Admissible out of balance (load moment) due to tooling Admissible rpm Admissible drive torque Gear ratio swivel drive Switching times3)4) Rotate tool disk:5) • incl. acceleration and braking • without acceleration and braking Turret unlock/lock -hydraulic Tool drive engage/disengage -hydraulic Adm. switching...

Open the catalog to page 6
PI 62 - 7

Series 0.5.437.2xx / .6xx Recommended motors for indexing drive Recommended motors for indexing drive protection class IP 67 shaft-side swiveling times for 30°-step without acceleration and braking s Size of turret 16 SAUTER control unit EK 600 SAUTER with rotary encoder activation1) Delta with control unit controlled via machine controll system

Open the catalog to page 7
PI 62 - 8

Series 0.5.437.2xx / .6xx Admissible Loads Admissible Loads Note The diagrams refer to static loads. In case of impact load (interrupted cutting), significantly lower values must be reckoned with. force + Fy tangential loading

Open the catalog to page 8
PI 62 - 9

Admissible Loads shunt loading force + Fx leading edge is the basis for dimension a longitudinal loading

Open the catalog to page 9
PI 62 - 10

Series 0.5.437.2xx / .6xx Dimension block shape Dimension block shape (NH Standard 1)

Open the catalog to page 10
PI 62 - 11

Series 0.5.437.2xx / .6xx Dimension block shape Disk-Type turret 0.5.437.2xx block shape (NH standard 1) L SAUTER-Motor with control unit EK 600 SAUTER drive with rotary encoder activation Delta-Motor with control unit Hint! plus motor length!

Open the catalog to page 11
PI 62 - 12

Series 0.5.437.2xx / .6xx Dimension block shape Dimension block shape

Open the catalog to page 12
PI 62 - 13

Series 0.5.437.2xx / .6xx Dimension block shape Disk-Type turret 0.5.437.2xx block shape L SAUTER-Motor with control unit EK 600 SAUTER drive with rotary encoder activation Delta-Motor with control unit

Open the catalog to page 13
PI 62 - 14

Series 0.5.437.2xx / .6xx Dimension L-shape Dimension L-shape (NH standard 1)

Open the catalog to page 14
PI 62 - 15

Series 0.5.437.2xx / .6xx Dimension L-shape Disk-Type turret 0.5.437.2xx L shape (NH standard 1) L SAUTER-Motor with control unit EK 600 SAUTER drive with rotary encoder activation Delta-Motor with control unit

Open the catalog to page 15
PI 62 - 16

Series 0.5.437.2xx / .6xx Dimension L-shape Dimension L-shape (NH standard 2)

Open the catalog to page 16
PI 62 - 17

Series 0.5.437.2xx / .6xx Dimension L-shape Disk-Type turret 0.5.437.2xx L shape (NH standard 2) L SAUTER-Motor with control unit EK 600 SAUTER drive with rotary encoder activation Delta-Motor with control unit

Open the catalog to page 17
PI 62 - 18

Series 0.5.437.2xx / .6xx Precision / Fluid-Drehdurchführung Precision / Fluid-Drehdurchführung Repeating accuracy (Multiple move to a switching position from the same direction) ± 1,6“ Indexing precision (Multiple move to a switching position from different direction) Fluid Rotary Feed-Through All turrets are deliverable with central fluid rotary feed-through: „uncontrolled“ version fluid supply in all switching positions e.g.for gripper actuation, also for sealing air „controlled“ version fluid supply in one switching defined positions e.g.for KSS, for automatic tool changes, and similar...

Open the catalog to page 18
PI 62 - 19

Series 0.5.437.2xx / .6xx Admissible duty cycle (DC) Admissible duty cycle (DC) Tool drive Performance Diagram *) specifications for mode apply to 2 min for performance.

Open the catalog to page 19
PI 62 - 20

Series 0.5.437.2xx / .6xx Performance Data for the Tool Coupling Performance Data for the Tool Coupling Performance data Drive rating2) Pnom/ Padm Mnom / Madm nnom/ nadm VDClv (direct current link voltage), without specification VDClv = 600V The values are reference values for short-term operation. Higher rpm generate more heat and noise. Torque limitation at motor converter required! The torque values apply to smooth-machining (such as thread drilling). In the case of machining with severe shock loads (e.g. face milling and similar operations) it is necessary to reduce the motor drive...

Open the catalog to page 20
PI 62 - 21

selectable working position Series Disk-type tool turret 0.5.437.2xx Coupling profil DIN 54801) distance Tool holder receptacle system cylinder shaft DIN 10889 (DIN 69880) Disk-type tool turret 0.5.437.6xx interface distance

Open the catalog to page 21
PI 62 - 22

0.5.437 Disk-type tool turret with tool direct drive coupling process with spindle positioning Type of design 2 Tools with switchable coupling 6 Tools with unswitchable coupling

Open the catalog to page 22
PI 62 - 23

Ordering Details Ordering Details Street: ++49 (0) 7123-926-0 Postcode, City: info@sauter-feinmechanik.com Name: Sauter Feinmechanik GmbH Postfach 1551 D-72545 Metzingen Germany SAUTER-Disk-type tool turret 0.5.437.2xx / .6xx Ordering details Possible configurations Your selection Basis turett Housing shape Size Number of switching positions Motor for indexing drive L / Block (NH 1/2) 16 / 20 8 / 12 / 16 SAUTER / Siemens / Fanuc / ... Installation position Radial tool drivel Working position Tool disc Special requirements:

Open the catalog to page 23

All Sauter Feinmechanik catalogs and technical brochures

  1. PI 21.3

    34 Pages

  2. PI 42

    51 Pages

  3. PI 46

    23 Pages

  4. Doublefix®

    1 Pages

  5. Modifix®

    1 Pages

  6. Solidpro

    1 Pages

  7. Speedfix

    1 Pages

  8. BMT Tooling

    1 Pages

  9. PI 43.2

    36 Pages

  10. PI 52

    24 Pages

  11. PI 31.2

    50 Pages

  12. PI 49 e

    21 Pages

Archived catalogs