PI 43.2
36Pages

Product information PI 43.2 Disk-type tool turret without tool drive Series with tool drive Series 2014-05-22

You can request following projection instruction: • PA 44.1 Other motors. Tool turret activation PA 44.2 Deltamotor control unit EK 700 NOTE: The information contained in this Product Information is in conformity with knowledge at the point of printing. We reserve the right to perform modifications within the framework of continuous further development.

Disk-Type Tool Turret Series 0.5.440.xxx without Tool Drive Description These turrets are suitable for use on turning machines for forward and reverse machining. They are equipped with all of the features and functions of modern highperformance tool turrets. They are suitable for series manufacture due to their robust design and short switching times. Turret range without tool drive with axial tool drive with radial tool drive Drive with controllable electric motor for very fast bidirectional swivel use of: • SAUTER drive unit EK 700 with motor and converter SAUTER drive with rotary encoder...

Tool disk Electrical loocking control Spur gear Planetary gearbox Motor for indexing drive Reference switch (optional) Hirth-type gearing cooling lubricant valve

Series 0.5.440.xxx Technische Daten Technische Daten Series Disk-type tool turret 0.5.440.xxx Number of switching positions Admissible tangential load (turret locked)1) Admissible mass moment of inertia of tools with tool disk and holder Standard load stage High load stage Admissible out of balance (load moment) due to tooling Gear ratio swivel drive3) Switching times Rotate tool disk:5) • incl. acceleration and braking • without acceleration and braking per additional partial step High load stage Turret unlock/lock -hydraulic Standard load stage Adm. switching frequency3) (median switching...

Recommended motors degree of protection to IP 67 swiveling times for 30°-step without acceleration and braking s Delta with Delta-control EK 700 controlled via machine controll system

Series 0.5.440.xxx Admissible Loads Admissible Loads Note The diagrams refer to static loads. In case of impact load (interrupted cutting), significantly lower values must be reckoned with. Size 32 Size 25 Size 20 Fz = Fx = 40% Fy Combination force + Fy (+Fx, Fz) Type Turn- forward- and reverse machining Size 32 Size 25 Size 20 Size 16 Size 12 Advance force +Fz (drilling forward and backward)

Series 0.5.440.xxx Admissible Loads Size 32 Size 25 Size 20 Size 16 Size 12 -Fz = Fx = 40% Fy Advance force -Fz (drilling forward and shunt load +Fx) leading edge is the basis for dimension a Size 32 Size 25 Size 20 Size 16 Advance force -Fz (drilling forward) (Only with L- and block-shape) PI_43_2_en_2014-05-22.fm

Series 0.5.440.xxx Dimension Foot shape Dimension Foot shape

Dimension Foot shape

Dimension block shape Dimension block shape (reinforced version / NH standard 1 >- with housing compatible with series 0.5.450.xxx

Series 0.5.440.xxx Dimension block shape Disk-type tool turret 0.5.440.xxx - block shape (Standard 1) Delta-Motor with control unit EK 700

Series 0.5.440.xxx Dimension block shape Dimension block shape (reinforced version / NH standars 2) with housing compatible with series 0.5.450.xxx

Series 0.5.440.xxx Dimension block shape Disk-typ tool turret 0.5.440.xxx - block shape (standard 2) Delta-Motor with control unit EK 700

Series 0.5.440.xxx Dimension Lshape Dimension Lshape (NH standard 1) Note with housing compatible with series 0.5.450.xxx L N H

Series 0.5.440.xxx Dimension Lshape Disk-type tool turret 0.5.440.xxx - L-Form (Standard 1) Delta-Motor with control unit EK 700

Series 0.5.440.xxx Dimesion L shape with housing compatible with series 0.5.450.xxx

Series 0.5.440.xxx Dimesion L shape Disk-type tool turret 0.5.440.xxx - L-Form (standard 2) Delta-Motor with control unit EK 700

Series 0.5.440.xxx Precision / Fluid Rotary Feed-Through Precision / Fluid Rotary Feed-Through A Repeating accuracy (Multiple move to a switching position from the same direction) ± 1,6“ x Indexing precision (Multiple move to a switching position from different direction) ± 4“ x Fluid Rotary Feed-Through All turrets are deliverable with central fluid rotary feed-through: „uncontrolled“ version fluid supply in all switching positions e.g.for sealing air, for gripper actuation, and similar actions „controlled“ version fluid supply in one switching positions e.g.for KSS, for automatic tool...

Series 0.5.433.xxx / 0.5.436.xxx with Axial Tool Drive (only available with foot-shape housing) Description These turrets are of modular construction and consist of a basic turret (4) of the 0.5.440.xxx series and a decentralised tool drive (2) mounted instead of the cooling lubricant ring. The tool drive has been designed for individually switchable driven tools. The tool drive motor (3) drives the sliding coupling (5) via the spur gear incorporated in the gearbox casing. The tool in the working position is switched on by means of the sliding coupling. Suitable driven tools Coupling...

Admissible duty cycle (DC) Admissible duty cycle (DC) Tool drive Performance Diagram n [U/min] nadm n [U/min] nadm Admissible duty cycle of the tool drive during short-time operation (reference values) The actual efficiency (DC) also depends on where the turret is installed and on the operating conditions! Pc = Required cutting performance [kW] Padm = Admissible drive rating [kW] Example calculation: Witch speed nc and witch power Pc with 40% DC are supported on a tool drive, size 20 According to the table on pages 26/27 / 30 and 33, the following values are valid for disk-type tool...

Series 0.5.433.xxx / 0.5.436.xxx Motor Arrangement Motor Arrangement Motor arrangement possible at 3 o´clock, 9 o´clock oder 12 o´clock positions foot area

Tool Arrangement Tool Arrangement ^ Position with toll drive O Position w/o tool drive

Series 0.5.433.1xx with axial tool drive Configurations Configurations on grey background are preferably deliverable! Further configurations – e.g. the version "left" – on request. ! Working position Turret Size Coupling profile