PI 25.3Crown-type turrets
33Pages

Product information PI 25.3 Crown-type tool turret 0.5.170.1xx

Table of Contents Tool turret Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Precision/type of protection . . . . . . . . . . . . . . . . . . . . . . . . . 13 Installation positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Drive motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Drives (examples) . . . . . . . . ....

Crown-type tool turret Short description Crown-type tool turret series 170 Short description Crown-type tool turrets are particularly suitable for Processing stations of transfer lines and revolving phased machine tools. High-speed processing with tool speeds of 15 000 rpm and higher. Processing sequences with very short times between machining. Specifications Single Motor Technology The indexing drive and the tool drive share one integrated motor SAUTER high-performance synchronous motors or commercially available spindle motors can be employed as drive units. Only the tool in working...

Crown-type tool turret Short description Driven tools Tool turretslewing axis external coolant lubricant supply Tool turret rotating head Space for electrics for limit switches and connecting terminals Housing Active tool in working position internal oolant lubricant supply

Crown-type tool turret Technical data Technical data Series Crown-type tool turret.5.170.1xx Number of indexing positions Adm. mass moment of inertia of the tooling (driven tools and tools) Adm. out-of-balance due to the centre of gravity Adm. tangential load (tool turret locked) Indexing time3) Rotate tool turret rotating head: Standard1) • inkl. acceleration and breaking • without acceleration and breaking per additional partial step Locking or unlocking tool turret Operating pressure Hydraulics Cooling lubricant Not: Pressure switch-off on swiveling4) • with external supply through the...

Crown-type tool turret Technical data < 25 (Filtering < 100 µm) < 100 (Filtering < 50 µm) on request 1 +10 ... +40 See „Installation positions“ page 14

Crown-type tool turret Technical data Series Crown-type tool turret 0.5.170.1xx Number of indexing positions Swiveling operation 1) Rated speed at the drive shaft Adm. torque at the drive shaft when accelerating and breaking Transmission ratio Drive shaft / tool turret rotating head iRev= nA/nD Mass moment of inertia of rotating and tool turret gear (relating to the drive shaft) Cutting operation Max. adm. drive speed2) Transmission ratio drive shaft / tool coupling Mass moment of inertia of the drive spindle Coupling profile SAUTER driven tools for this purpose 1) 2) 3) Please observe...

Crown-type tool turret Technical data

Crown-type tool turret Dimension Depicted: RIGHT version. The dimensions are identical for both the RIGHT and LEFT versions Crown-type tool turret 0.5.170.1xx Number of indexing positions

Crown-type tool turret Precision - Tool Turret / degree of protection Precision - Tool Turret / degree of protection Repeating accuracy (multiple activation of one indexing position from the same direction) X [mm]/100 [mm] µm Indexing position (activation of any indexing position from different directions) • driven tool location bores – Indexing position Bore tolerance driven tool bearing surfaces Tool turret hysteresis To determine the indexing position of all tool tips, the respective precisions of the driven tools and the tools must be taken into consideration. Degree of protection to...

Crown-type tool turret Installation positions Installation positions Installation position 3 only left version Installation position 2 only right version Installation position 6 Installation position 5

Crown-type tool turret Tool turret - group drive Tool turret - group drive Variant 1 • for mounting a cooling lubricant rotary transmission lead through (SAUTER belt drive / motor mounting axially displaced) • or cooling lubricant feed through the hollow motor shaft (purchased motor with hollow shaft hub external) • or cooling lubricant feed through the hollow motor shaft (purchased motor with hollow shaft hub internal) Crown-type tool turret 0.5.170.1xx

Crown-type tool turret Drive motors Drive motors Recommended drive motors (selection) Series Motors for direct mounting (with hollow Crown-type tool turret 0.5.170.1xx SAUTER synchronous motor 0.8.100.0xx nmax Mass moment of inertia Siemens spindle motr 1 PH7 .. Speed Motores with solid shaft Mass moment of inertia Rexroth IndraDynA MAD .. Speed Massenträgheitsmoment Fanuc spindle motor 1 PH7 .. Speed Mass moment of inertia Kessler spindle motor with DMQ ..air cooling Motores with solid shaftt Mass moment of inertia Fanuc spindle motor with coil reversing Speed Mass moment of inertia

Crown-type tool turret

Crown-type tool turret Direct drive (example) Direct drive (example) Direct drive with SAUTER-synchronous motor SAUTER-synchronous motor Cooling lubricantrotary transmission lead through ** Coaxial drive with flange motorand coupling Drive motor with transmitter system and hollow shaft Motor flange Coupling Cooling lubricant transfer nipple Cooling lubricantrotary transmission lead through ** NOTE: In the case of direct drive, please observe the admissible deviation of position of the motor shaft to the tool turret drive shaft for the coupling!

Crown-type tool turret Direct drive (example) Drive with toothed-belt gearing Only available in size 12 High performance toothed belt drive* i=0.5/1/2 Drive motor with transmitter system Cooling lubricantrotary transmission ** lead through Proximity switch for drive reference point (if necessary) Slide * e.g. Goodyear-Eagle, u.a. ** e.g. Make Deublin, GAT, or similar

Crown-type tool turret Radial load Radial load Admissible radial load of the standard drive shaft through toothed belt lateral force Nominal bearing service life (h10) = 20 000 h