PSB010H2

PSB010H2

PSB010H2

Product catalog summary
Specifications:
  • Product: PSB010H2 - Plurima
  • Number of Poles: 1
  • Voltage: 750 V
  • Current: 17.5 A
  • Wire Section: 0.05 ÷ 1.5 mm² / 30 ÷ 16 AWG
  • Pitch: 10 mm
  • Connection Angle: 0°
  • Number of Levels: 1
  • Color: Green (RAL 6032)
  • Soldering Technology: Wave
  • Approvals: UL, IEC
General Data:
  • Screw Dimension: M3
  • Stripping Length: 6 mm
  • Operating Temperature Range: -40°C to 105°C
  • Contact Resistance: <15 mOhm
  • Insulation Resistance: >1 GOhm
Certifications:
  • IEC (n.EN60998): Rated Voltage 750 V, Nominal Current 17.5 A, Wire Section 1.5 mm², Tightening Torque 0.5 NM, Insulating Category I
  • UL (n.E167473): Nominal Current 13.5 A, Wire Section 16 AWG

Note: Limited ratings apply for use in industrial control equipment with specific current limits based on voltage range.

Materials:
  • Screw Material: Nickel-plated copper alloy
  • Terminal Contact: Nickel and tin on copper alloy
  • Clamp Tightening: Nickel-plated copper alloy
  • Insulating Housing Material: PA Polyamide
Additional Information:
  • Insulating Material Group: I (CTI >= 600V)
  • Self-extinguishing Class: UL94 V0
  • Available Colors: Green, Black, Light Grey, Dark Grey, Orange, Blue, Red, and others on demand
See more

Catalog excerpts

PSB010H2-1

PSB010H2 - Plurima Number of poles: 1, Clamp tightening, 17.5A, 1mm², 16AWG, 750V, Pitch 10 mm, Modular, Connection Angle 0°, Number of levels: 1, Green (RAL 6032), Soldering technology Wave, UL, IEC Number of poles: Number of levels: Sides configuration: Pitch: Voltage: Current : Wire section: Available approvals: General Data Features Screw dimension Stripping length Operating temperature range Contact resistance Insulation resistance IEC (n.EN60998) Rated voltage Nominal current Wire section T ightening torque Insulating category UL (n.E167473) Usage Group Rated voltage Nominal current Wire section * These limited ratings are applicable to a terminal block for use in or with industrial control equipment whereby the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, or 5A at 301-600V, or the maximum ampere rating, whichever is less. Components Screw material T erminal contact Clamp tightening Insulating housing material SAURO srl - inf [email protected] Nickel-plated copper alloy Nickel and tin on copper alloy Nickel-plated copper alloy PA Polyamide 16.8.2023 Pagi

 Open the catalog to page 1
PSB010H2-2

Components Insulating material group Self-extinguishing class UL94 Available colors green black light grey dark gray orange blue red another colors Technical drawing (similar to RAL 6032) (similar to RAL 9005) (similar to RAL 7035) (similar to RAL 7040) (similar to RAL 2003) (similar to RAL 5012) (similar to RAL 3017) (on demand) Derating curve

 Open the catalog to page 2

All SAURO catalogs and technical brochures

  1. PSB010D6

    2  Pages

  2. PSB010D2

    2  Pages

  3. CGM020M3

    2  Pages

  4. CGM020M2

    2  Pages

  5. CGM020M1

    2  Pages

  6. CGM020A5

    2  Pages

  7. CGM020A1

    2  Pages

  8. CGM010M2

    2  Pages

  9. CBF020L8

    2  Pages

  10. CBF020L7

    2  Pages

  11. CBF020DT

    2  Pages

  12. CBF020D9

    2  Pages

  13. CBF020D8

    2  Pages

  14. CBF020D7

    2  Pages

  15. STC 107

    2  Pages

  16. STC 072

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.