Specifications:
The PSB010D2 - Plurima is a modular terminal block with the following specifications: it has 2 poles and 2 levels, with a pitch of 10 mm. It supports a voltage of 750 V and a current of 17.5 A. The wire section ranges from 0.05 to 1.5 mm² or 30 to 16 AWG. The connection angle is 0°, and it uses wave soldering technology. The product is available in green (RAL 6032) and is approved by UL and IEC standards.

General Data:
The terminal block features a screw dimension of M3 and a stripping length of 6 mm. It operates within a temperature range of -40°C to 105°C. The contact resistance is less than 15 mOhm, and the insulation resistance is greater than 1 GOhm. The tightening torque is 0.5 NM, and it falls under insulating category I.

Certifications:
The product is certified under IEC (n.EN60998) with a rated voltage of 750 V and a nominal current of 17.5 A. Under UL (n.E167473), it has a nominal current of 13.5 A and a wire section of 16 AWG. The terminal block is suitable for use in industrial control equipment with specific current limitations based on voltage ranges.

Materials:
The components are made from nickel-plated copper alloy for screws and clamp tightening, and nickel and tin on copper alloy for terminal contacts. The insulating housing material is PA Polyamide, with a self-extinguishing class of UL94 V0. The insulating material group is I (CTI >= 600V).

Available Colors:
The terminal block is available in several colors: green (RAL 6032), black (RAL 9005), light grey (RAL 7035), dark gray (RAL 7040), orange (RAL 2003), blue (RAL 5012), red (RAL 3017), and other colors on demand.