MBBD060A7-0NC0P

Product catalog summary

Specifications:
The terminal block model MBBD060A7-0NC0P is designed for industrial control equipment. It features 6 poles and a single level configuration with a pitch of 7.62 mm. The block supports a voltage of 300 V and a current of 7 A, with a wire section range of 28 to 18 AWG. It is not stackable and has a connection angle of 0°. The terminal block is black (RAL 9005) and uses reflow SMD soldering technology. It is UL certified (n.E167473).

General Data:
The terminal block has a screw dimension of M2 and operates within a temperature range of -40°C to 130°C. It has a contact resistance of less than 15 mOhm and an insulation resistance greater than 1 GOhm. The tightening torque is specified at 2.7, and it falls under insulating category I.

Materials:
The screw material is a nickel-plated copper alloy, while the terminal contact is made of nickel and tin on a copper alloy. The clamp tightening is also nickel-plated copper alloy. The insulating housing material is PA Polyamide, classified under insulating material group I (CTI >= 600V) and self-extinguishing class UL94 V0.

Available Colors:
The terminal block is available in several colors, including green (RAL 6032), black (RAL 9005), light grey (RAL 7035), dark gray (RAL 7040), orange (RAL 2003), blue (RAL 5012), red (RAL 3017), and other colors on demand.

Catalog excerpts

MBBD060A7-0NC0P - Terminal block Number of poles: 6, Clamp tightening, 7A, mm², 18AWG, 300V, Pitch 7,62 mm, Not stackable, Connection Angle 0°, Number of levels: 1, Black (RAL 9005), Soldering technology Reflow SMD, UL Number of poles: Number of levels: Sides configuration: Pitch: Voltage: Current : Wire section: Available approvals: General Data Features Screw dimension Operating temperature range Contact resistance Insulation resistance Certifications UL (n.E167473) Usage Group Rated voltage Nominal current Wire section T ightening torque Insulating category * These limited ratings are applicable to a terminal block for use in or with industrial control equipment whereby the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, or 5A at 301-600V, or the maximum ampere rating, whichever is less. Components Screw material T erminal contact Clamp tightening Insulating housing material Insulating material group Self-extinguishing class UL94 Nickel-plated copper alloy Nickel and tin on copper alloy Nickel-plated copper alloy PA Polyamide I (CT I >= 600V) V0 Available colors green black SAURO srl - inf [email protected] (similar to RAL 6032) (similar to RAL 9005) 16.8.2023 Pagina

Open the catalog to page 1

Available colors light grey dark gray orange blue red another colors Technical drawing (similar to RAL 7035) (similar to RAL 7040) (similar to RAL 2003) (similar to RAL 5012) (similar to RAL 3017) (on demand) Derating curve

Open the catalog to page 2