CGM020A5

Product catalog summary

Specifications:
The document outlines the specifications for a terminal block model CGM020A5. It features 2 poles, a current rating of 16A, and a wire section range of 0.05 to 2.5 mm² (30 to 12 AWG). The pitch is 5.08 mm, and it is side stackable with a connection angle of 0 degrees. The rated voltage is 300V, and it is available in green (RAL 6032).

Certifications:
The product is certified by UL, VDE, and IMQ. Specific ratings include:

IMQ: Rated voltage of 300V, nominal current of 12A, and wire section of 2.5 mm².
UL: Nominal current of 15A and wire section of 12 AWG.
VDE: Rated voltage of 250V and nominal current of 16A.

Materials:
The terminal block is constructed with nickel-plated copper alloy for screws and clamp tightening, tin-plated copper alloy for terminal contacts, and PA Polyamide for the insulating housing. It belongs to insulating material group I with a CTI of >= 600V and a self-extinguishing class of UL94 V0.

Operating Conditions:
The operating temperature range is -40°C to 100°C. The contact resistance is less than 15 mOhm, and the insulation resistance is greater than 1 GOhm. The stripping length is 7.5 mm, and the screw dimension is M3.

Color Options:
Available colors include green, black, light grey, dark grey, orange, blue, red, and other colors on demand.

Usage Limitations:
The terminal block is suitable for use in industrial control equipment with specific current limitations based on voltage ranges: 15A at 51-150V, 10A at 151-300V, or 5A at 301-600V.

Catalog excerpts

CGM020A5 - Header Number of poles: 2, 16A, 2.5mm², 300V, Pitch 5,08 mm, Side stackable, Connection Angle 0, Green (RAL 6032), Soldering technology Not applicable, UL, VDE, IMQ Number of poles: Number of levels: Sides configuration: Pitch: Voltage: Current : Wire section: Available approvals: General Data Features Screw dimension Stripping length Operating temperature range Contact resistance Insulation resistance Rated voltage Nominal current Wire section Insulating category Overvoltage category/Pollution degree Impulse voltage Rated voltage Insulation voltage UL (n.E167473) Usage Group Rated voltage Nominal current Wire section * These limited ratings are applicable to a terminal block for use in or with industrial control equipment whereby the load on any single circuit of the terminal block does not exceed 15A at 51-150V, 10A at 151-300V, or 5A at 301-600V, or the maximum ampere rating, whichever is less. VDE (n.40027448 Reg.-Nr. 112754) Rated voltage Nominal current SAURO srl - inf [email protected]

Open the catalog to page 1

VDE (n.40027448 Reg.-Nr. 112754) Wire section T ightening torque Insulating category Overvoltage category/Pollution degree Components Screw material T erminal contact Clamp tightening Insulating housing material Insulating material group Self-extinguishing class UL94 Nickel-plated copper alloy T in-plated copper alloy Nickel-plated copper alloy PA Polyamide I (CT I >= 600V) V0 Available colors green black light grey dark gray orange blue red another colors Technical drawing (similar to RAL 6032) (similar to RAL 9005) (similar to RAL 7035) (similar to RAL 7040) (similar to RAL 2003) (similar to...

Open the catalog to page 2