NEWS 210-2 FACE MILLING CUTTERS 88° S8801-8W..

Product catalog summary

Introduction
This document provides technical specifications and guidelines for the new 88° face milling cutters, model S8801-8W, featuring SNMX inserts with 8 usable cutting edges.

Specifications
The face milling cutters are available in various sizes with diameters ranging from 50mm to 250mm. Each cutter is equipped with a coolant bore and is designed for different machining applications, including finishing, medium, and roughing operations. The cutters are compatible with SNMX inserts, which offer 8 cutting edges due to their two-sided design.

Product Range
The document lists several models of the S8801-8W series, detailing their dimensions, weight, and recommended torque. The models vary in the number of teeth (Z) and are categorized by their application suitability (A, B, C, D).

Machining Parameters
Key parameters for machining include cutting speed (Vc), feed per tooth (fz), feed per revolution (fn), and feed speed (Vf). The document provides formulas for calculating these parameters based on the cutter diameter and application type.

Material Compatibility
The cutters are suitable for a range of materials, including non-alloy steel, low and high alloy steel, stainless steel, cast iron, aluminum, copper, and high-temperature alloys. Specific cutting speeds and feed rates are recommended for each material type.

Insert Selection
The SNMX inserts are available in different grades, both coated and uncoated, to suit various machining conditions. The document provides guidance on selecting the appropriate insert based on the material and desired machining outcome.

Contact Information
For further inquiries, contact details for SAU S.p.A. and its Modena branch are provided, including phone numbers, fax, and email addresses.

Catalog excerpts

NEWS 210-2 FACE MILLING CUTTERS 88° S8801-8W..-1

NEWS 210/2 NUOVE FRESE PER SPIANATURA A 88° S8801-8W.. FACE MILLING CUTTERS 88° S8801-8W.. FARE RIFERIMENTO LPA 212 VALIDO DAL 02/04/2012 PLEASE REFER TO LPA 212 VALID FROM 02/04/2012 LATO A - SIDE A 1 4 LATO B - SIDE B 2 5 3 8 6 7 INSERTO SNMX.. CON 8 TAGLIENTI UTILI SNMX.. INSERT WITH 8 USABLE CUTTING EDGES

Open the catalog to page 1

NEWS 210-2 FACE MILLING CUTTERS 88° S8801-8W..-3

Scelta dell’inserto e parametri di lavoro - Choice of the insert and machining parameters Auswahl der platte und schnittdaten - Choix de la plaquette et paramétres de travail HT Prez.List. Price List COD. SNMX 1206 QNN .K52 SNMX 120612 .K52 P M K N S NON RIV. CEMENTED CARBIDE GRADES HC 90° l r RIVESTITI COATED GRADES BESCHICHTET RECOUVERTS d1 d F3010 F1320 + Toughness Tenacità HW CERMET SCELTA VELOCE - QUICK PICK H € F M R F M R F M R F M R F M R F M R 11,6 11,6 11,6 11,6 l d s s d1 r a° 12,7 12,7 6,35 4,5 1,2 – 12,7 12,7 6,35 4,5 1,2 – CON ADDUZIONE LUBROREFRIGERANTE - WITH COOLANT SUPPLY SENZA...

Open the catalog to page 3

NEWS 210-2 FACE MILLING CUTTERS 88° S8801-8W..-4

FILIALE DI MODENA SAU S.p.A. Via Mozart, 47 41122 Modena (MO) Italy Tel. 0039 059 280706 Fax. 0039 059 280109 [email protected] www.sautool.it Via dei Raseni, 6/B 41040 Polinago (MO) Italy Tel. 0039 0536 47510 Fax. 0039 0536 47275 [email protected] www.sautool.it

Open the catalog to page 4