Shredding Chamber Specifications

The document provides detailed specifications for various shredding chamber models, focusing on chamber dimensions and blade configurations.

Chamber Dimensions (L x W in mm)

• Models include 4S 7/40, 4S 10/40, 4S 12/40, 4S 7/60, 4S 10/60, and 4S 12/60.
• Dimensions range from 698 x 800 mm to 1218 x 800 mm depending on the model.

Blade Configuration

Blade counts are specified for four different blade thicknesses: 15mm, 19mm, 29mm, and 43mm. Each blade thickness has a number of central blades (C) and recirculating blades (R) indicated.

• For example, the 4S 7/40 model with 15mm blades has 46 central blades and 46 recirculating blades.
• Blade counts decrease as blade thickness increases.
• Some models do not support certain blade thicknesses, indicated by dashes (-).

Blade Types

• (C) refers to the Central Cutting Blade.
• (R) refers to the Recirculating Blade.

Power and Model Information

The document references power ratings in kilowatts (kW) and blade counts but does not provide explicit values in the excerpt. Models are identified with codes such as 4S/40 and 4S/60.

Summary of Critical Parameters

• Shredding chamber size varies by model, affecting blade count and configuration.
• Blade thickness options influence the number of blades installed.
• Blade types are clearly distinguished to optimize shredding performance.
• Power ratings and model codes are used for classification but require further detail.

This structured data supports selection and configuration of shredding chambers based on size, blade type, and thickness for specific operational needs.