Catalogs >
SatLab Geosolutions AB >
SatLab/Multi-purpose GNSS Receiver/ SLC

SatLab/Multi-purpose GNSS Receiver/ SLC
2Pages

Catalog excerpts

SatLab/Multi-purpose GNSS Receiver/ SLC - 1

GNSS Signal Tracking Positioning Output Multi-purpose GNSS Receiver HORIZONTAL POSOION ACCURACY (RMS) Single Point LI Single Point L1/L2 SBAS DGPS RTK Initialization Time Initialization Reliability MEASUREMENT PREOSION (RMS) LI Carrier Phase L2 Carrier Phase L2C Carrier Phase SYSTEM Internal Memory 32GB Interface USB, RF (External GNSS Antenna), RS232, DATA MANAGEMENT NTRIP, intRTK Support NMEA0183, NovAtel ASCII and Binary Logs RTCM 2.1,2.3, 3.0,3.1, 3.2 CMR, CMR+, and RTCA Raw data recording for post processing Field upgradable software Differential GPS positioning GENERAL Environmental IP67 environmental protection Temperature -10°C to 50°C Operating -20°C to 65°C Storage Physical Properties Size: 250mm x 95mm x 30mm Weight 620g Power: Mini USB Charging (power bank compatible) Battery Life: 8-12 hours Note 1 Hardware ready for L3 and L5 1 Designed for BeiDou phase 2 and 3, Bland B2 compatibility. B3 conditionally supported and subject to change. ' Elbe support only. Hardware ready for E6bc E Optional

Open the catalog to page 1

SatLab/Multi-purpose GNSS Receiver/ SLC - 2

SLC Multi-purpose GNSS Receiver Most agile and intuitive GNSS RTK Rover V ios Compatibility Compatibility • Land Survey •Topography and As-built • Landfill • Hydrographic • Agriculture • Sensor • UAV Base Station The SLC multi-purpose GNSS receiver is a surveying grade equipment armed with an industrial modem to access wireless network and a one-button operation for easy usage. Attach your tablet on the mounting plates available and connect it to the 3.5G modem with RTK corrections for cm accuracy. The USB/RS232 serial connection also allows for external power, UHF radio connection or wired...

Open the catalog to page 2