NEW GENERATION 4th LEVEL LOCK
4Pages

4th LEVEL AZM200 > ±5 mm tolerance for sensorial technique. > In compliance with EN ISO 13849-1, IEC 61508,IEC 60947-5-3 > Suitable for applications up to category 4 - up to SIL 3 - PL up to “e” > Simple assembling with few screws. > Possible unlocking from inside with a simple intuitive operation. Compatible with all SATECH assembling systems SCHMERSAL AZM415 4th level Schmersal system completed with Satech standard. > Ergonomic external handle. > Inner handle for emergency unlocking > Electric emergency release of 4th category by means of a simple redundant microswitch. Prescriptions: EN ISO 13849-1 B10d : 2.000.000 Compatible with all SATECH assembling systems Code: MISCHAZM415 3rd / 4th LEVEL Locking system designed for the personnel’s safety > Antipanic unlocking for emergency opening from inside. > In-built microswitch. > Double control mechanical lock. Compatible with all SATECH assembling systems ANTIPANIC System perfectly integrated with Satech standard panels > Compact execution. > Limited access from outside. > Fast and safe opening from inside. > Lock with universal dedicated cylinder. Compatible with all SATECH assembling systems

KEY LOCK Functional lock in Satech standard panels. It allows to prevent the access to unauthorized personnel by means of a key. > Compact execution. > Limited access from outside. > Lock with universal dedicated cylinder. These closing devices are only to be used to allow access to an area where it is possible to exit through an unlocked door. Compatible with all SATECH assembling systems BOLT System for Satech double-leaf doors and opposing sliding doors. > Simple mechanical execution. > Universal for each type of safety switch. > It protects the safety switch actuator. > Precise during...

UNIVERSAL BRACKETS FOR MICRO SWITCHES > SATECH has designed and produced a universal supporting system for safety micro switches allowing an easy and fast assembling of all the most usual safety micro switches on all standard doors. That avoids the expensive adjustment of supports to the models of different manufacturers. Compatible with all SATECH assembling systems SUPPORT STRUTS In case of horizontal dynamic loads due to large doors or of unfavourable positions in the protection lay-out, the uprights of the Basic and Strong Series can be stiffened by support struts to obtain a very...

CUTTING KIT These systems are indicated for a fast and easy adaptation of Satech’s standard panels in unforeseen assembling situations or when there is a need to change the size of the protections over time. Compatible with systems Basic, Strong and Green Fast ADJUSTABLE BASEPLATES AND SHIMS Those two accessories represent a solution to adjust the support of the uprights on the ground leveling the defects of the industrial floors, or the adjustment of the floor slope imposed by the requirements of liquid collection. Compatible with systems Basic, Strong and MDF VARIABLE ANGLE JOINT This...