English Catalogue
34Pages

WWW.SATECH.IT >MODULAR PROTECTION SYSTEMS Satech Safety Technology Spa Via Scagnello, 48 I-23885 Calco (LC) Phone +39 039 99.11.81 Fax +39 039 99.11.870 info@satech.it www.satech.it EN STANDARDS FOR SAFETY IN WORKING ENVIRONMENTS EN 953+A1 General requirements for the design and manufacture of fixed and movable guards. 5.2.4 In order to minimise the need for their removal, guards shall be designed and manufactured to assure an adequate process visibility. 5.10 Where it’s necessary to see the operation of the machine through the guard, materials with adequate features shall be selected. The open area and the colour should allow visibility. ISO 14122-3 Permanent means of access to machinery. Ladder, step ladder, safety rails. EN ISO 12100-1 Basic concepts, general design principles. EN ISO 13857 Safety distances to prevent the contact of dangerous areas with upper and lower limbs. EN 349 Minimum distances to avoid squashing of body parts EN ISO 10218 Industrial handling robots. Safety. EN 1088+A2 Interlocking devices designed for guards. Design and selection concepts. 2006/42/CE Machinery Directive.

- EN Standards about safety > If the dangerous area is at low risk, the height h of this area shall be 2500 mm. > If the dangerous area is at high risk, the height h of the dangerous area shall be 2700 mm or further safety measures shall be adopted. > Table 4 gives sr for regular openings for persons of 14 years of age and above. The dimension of the opening, e, corresponds to the side of a square opening, the diameter of a round opening and the narrowest dimension of a slot opening. For openings > 120mm, safety distances in accordance with 4.2.2 shall be used. > In general, safety...

AutoCad Design PAG. 02 Total management of the workflow PAG. 04 Captive fastening systems PAG. 06 THE COMPANY Basic PAG. 08 Strong PAG. 10 Green Fast PAG. 12 Mdf PAG. 14 BodyGuard PAG. 16 MODULAR SYSTEMS Panels PAG. 18 Doors PAG. 22 Locks and accessories PAG. 28 COMPLIMENTARY PRODUCTS Index

AUTOCAD DESIGN > Satech have made an important investment in software for 3D automatic design of modular guards. This allows for the optimization of the selection of modules and a 3D drawing that is immediately understood by assemblers. AUTOCAD DESIGN ADVANTAGES i Design Speed: thanks to their dedicated software, Satech are able to design complex layouts in a very short time. 1 Realistic execution: the layout is directly made on the customer’s drawing and this immediately highlights any possible interference with the plant 2 Global and immediate view of the layout of elements: the...

CUSTOMER’S LAYOUT: The design starts directly from the DWG or DXF file sent by the customer. AUTOCAD DESIGN: Use of Autocad allows dialogue with the customers directly without the need of any file conversion. 3D view: The 3D view is objective and does not allow any possible mis-interpretation of the positioning of the protections. FROM THE CUSTOMER’S NEEDS TO CUSTOMIZED DESIGN

TOTAL MANAGEMENT OF WORKFLOW > The constant development of assembly systems allows Satech to propose the optimal solutions for the most critical conditions, always based on the structured model of the “Modular Panel” to achieve a cost effective result for even complex systems of modular guards. STOCK > Satech have at their disposal a considerable range of finished, components in stock, allowing an extremely short-term delivery of standard products or products in special colours or designs. PACKING AND SHIPPING > Satech are extremely careful from the preparation and packing of materials to...

SERVICES AND AFTER SALES ASSISTANCE ASSEMBLERS EDUCATION > In order to ensure a complete and total service to customers, Satech give particolar attention to education and support for the assemblers. Our education and support plan is provided for assemblers of the guarding systems and includes theoretic teaching and practical assembly tests of the main parts, such as doors, safety switches and locks. It also provides a clear overview of the plant based on 3D layout. ASSEMBLING SERVICE > Satech are also able to provide an assembly service for their customers, through a network of approved...

CAPTIVE FASTENING SYSTEMS 6 - Captive Fastening System (Directive about machines 2006/42/CE) > Following the update of European Directive on the safety of the machines (2006/42/CE), Satech has developed patented captive fastening systems for its complete range of products. > Economic and simple solution > Absolute certainty of captiveness > Compliance with the CE standards on captiveness of the fixing elements. > Quick assembly i

CAPTIVE FASTENING FOR BASIC AND STRONG PROTECTION SYSTEMS > The captive fastening applied to Basic and Strong systems consists of a clip using to a special screw and a suitable captive nut together. The clip also can slide along the upright but can not be separated from it. CAPTIVE FASTENING FOR GREEN FAST PROTECTION SYSTEM > The introduction of a special screw and a suitable nut for clamping the baseplate holding the panels, like the adoption of a special coupling pressing that maintains the position of the upper mating spring ensures the captiveness of the fixing systems. CAPTIVE...

> Protection system consisting of uprights 40x40 and panels with frame 20x20 connected by fast assembly clamps patented by Satech or screws. It is used for the usual application in all guards for plants and machines. PERIMETER PROTECTION SERIES BASIC > Satech have developed a connecting system between panel and upright allowing to achieve remarkable saving of time during assembling and height adjustment. It also allows easy reinstallation of the guard being removed for non-routine mainteinance EN 953+A1 6.4.3.1 b. PATENT CLIP BASIC 25% TIME SAVED compared to traditional system CAPTIVE...

> Protection system consisting of uprights 60x60 and panels with frame 20x20 and 30x30 connected by fast assembly clamps patented by Satech. It’s used in heavy conditions such as in industrial robotics or in steel industry applications. PERIMETER PROTECTION SERIES STRONG > Satech have developed a connecting system between panel and upright allowing us to achieve a remarkable saving of time during assembly and provide height adjustment. It also allows easy reinstallation of the Guard being removed for non-routine mainteinance EN 953+A1 6.4.3.1 b. BREVETTO CLIP STRONG / HEAVY CAPTIVE...