PM180 Brochure
16Pages

MULTI-PURPOSE DEVICE FOR MANY APPLICATIONS, INCLUDING: AUTOMATION CONTROLLER POWER QUALITY ANALYZER (PQA)  REVENUE GRADE CHECK METER  DIGITAL FAULT RECORDER (DFR)  SEQUENCE OF EVENTS (SOE)  POWER METER WITH IEC 61850 PROTOCOL  MOTORS AND LARGE LOAD

SATEC eXpertMeterTM PM180 is a high performance analyzer that allows versatile uses. The high performance of the PM180, together with the unique flexible design of the expansion cards and the versatile installation on DIN rail, 4” round or 92x92mm cutout, enables its use in a large variety of applications, in which it can substitute several other devices—saving costs, space and complexity. Wide range of control and alarm options: digital & analog I/O, GPS time sync. and more Auxiliary PS for redundancy Four galvanically isolated voltage channels (standard) Standard communication: Ethernet,...

Local & Remote Displays The PM180 can be connected to a local display, plus up to two remote displays (via RS-485), at the same time. The selection of displays includes LCD or LED display in various configurations. Multilingual user interface -W~ 5.7" Graphic color touchscreen -V- TFT technology with LED backlight IR port & front USB port -▼- 3-row bright red LED display module -▼- RGM180 RDM180 Multi-window bright red LED display module -▼-

The unique modular design of the PM180 ensures its adaptation to changing needs, through a selection of numerous plug-in options for multiple customer applications. The PM180 can have up to 3 expansions modules. 3 slots for add-on modules Communication COMMUNICATION PORTS IRIG-B module □ Optically isolated IRIG-B port □ Second RS-422/485 COM port TXFX module □Redundant Ethernet port □ 10/100 Mbit with RJ45 connector □100Base FX with SC connector 2G/3G cellular modem □Antenna connection: SMA □ Supports UMTS/HSPA+ bands: 800/850/900/AWS/1900/2100 Automation & Control DIGITAL INPUTS 16 inputs...

PM180 as a Bay Controller Unit (BCU) SATEC's PM180 is a cost effective solution for electrical substation automation. By adding a single PM180 device to each feeder, ALL the information required for substation automation is provided. The PM180 extends the life expectancy of electromechanical relays by providing information lacking in electromechanical devices without interfering in the protection scheme. PM180 provides fully automated control of substation switching devices. After the switches are configured in the device, typically no additional logic is required for controller operation,...

Cutting Edge Power Quality Analyzer & Recorder The PM180 is the most advanced power quality analyzer and recorder on the market. The instrument is a product of SATEC's 25 years of experience in the creation of power quality instruments. The PM180 is designed to fully comply with the most demanding industry standard, IEC 61000-4-30 Class A. It provides power quality reports and statistics according to IEEE 1159, EN50160, GOST 13109 or GOST 54149, complimented by comprehensive power quality event/data log with waveforms available for detailed Power Quality event analysis. Redundant power...

Designed for Revenue Grade metering, the PM180 provides a high accuracy energy measurement that can be used to check the utility meter, as well as adding power quality and control functions. For high performance revenue metering, the PM180 includes: □ Exceeding Revenue 0.2S Class Accuracy (IEC 62053-22) □ Built-in Time Of Use (TOU) with a 10 year calendar, 16 types of days and up to 8 tariff changes per day for each daily profile The precise measurement class of accuracy ensures that the energy readings are better than the utility meter's readings, which makes it trusty when there is a...

SATEC PM180 includes true Digital Fault Recording and Disturbance Recording. The standard device includes four current channels for up to 20xIn (100A @ In=5A) of fault currents. Adding the DFR module (page 4) allows for separated connection of measurement CTs and protection CTs of up to 40xIn (200A). Three AC voltage channels and one AC/DC measurement input channels are also included. Multiple PM180 devices can cross trigger for up to 20 cycles of pre-fault information for distributed recording. Fault information can be exported to PQDIF/COMTRADE format via PAS software. The fault recorder...

SINGLE PHASE SHORT CIRCUIT FAULT INFORMATION (PAS) Accurate fault location reduces repair costs by avoiding lengthy and expensive patrol using car or helicopter, and expedites repairs and restoration of the power; thus increasing availability time and customer satisfaction. The PM180 includes a high accuracy distance to fault calculation algorithm, based on the measuring of 3 or 4 voltages, 3 or 4 currents and the currents of parallel line when present, at the upstream side of the fault. The algorithm includes compensation for CT and PT errors and results with average accuracy of 0.5%...

The possibility to build SAS (Substation Automation System) rests on the strong technological development of large-scale integrated circuits, leading to the present availability of advanced, fast, and powerful microprocessors. The result was an evolution of substation secondary equipment, from electro-mechanical devices to digital devices. This in turn provided the possibility of implementing SAS using several intelligent electronic devices (IEDs) to perform the required functions (protection, local and remote monitoring and control, etc.). As a consequence, the need arose for efficient...

Electrical motors and other large loads are an important part of the electrical equipment and are dominant in the overall consumption. As a result, they significantly affect the energy efficiency and site reliability. Monitoring main motors includes observing their energy consumption, tracking their health and examining their efficiency. Energy Consumption Electric motors consume about 50% of the world's energy. It is therefore very important to track their energy consumption. While a basic power meter can do this job, for large motors it is recommended to use a higher accuracy device, with...