PM175 Datasheet
6Pages

PM175 PM175 POWER QUALITY ANALYZER The PM175 is a compact, multi-function, three-phase AC powermeter and power quality analyzer specially designed to meet the requirements of users ranging from electrical panel builders to substation operators. Selection of bright 3-row LED or 5.7" touch screen graphic color display provides easy local meter readings. The display module is freely detachable and can be located at a distance of up to 1000 meters from the device. Two communication ports allow local and remote automatic meter readings and setup though the supplemental communication or user data acquisition software. Different communication options are available for remote communications with the meter including TCP/IP, Profibus and public telephone lines. Features * 3 voltage and 3 current transformer-isolated AC inputs for direct connection to power line or via potential and current transformers * Multi-function 3-phase meter (true RMS, volts, amps, power, power factor, neutral current, voltage and current unbalance, frequency) * Embedded harmonic analyzer, voltage and current THD, current TDD and K-Factor * Voltage and current harmonic spectrum and angles, up to 50th order * Inter-harmonics THD * Ampere/Volt/THD/TDD demand meter * Class 0.2S * Time-of-Use (TOU), 8 tariff energy/demand registers x 8 tariffs, 4 seasons x 4 types of days, 8 tariff changes per day, easy programmable tariff schedule * Automatic daily profile for energy and maximum demand readings (total and tariff registers) * Embedded programmable controller; 16 control setpoints; programmable thresholds and delays; relay output control; 1/2-cycle response time * Event recorder for logging internal diagnostics events, control events and I/O operations * 16 data recorders; programmable data logs on a periodic basis and on any internal and external trigger * Two waveform recorders; simultaneous 6-channel AC recording in a single plot; sampling rate of 32, 64 and 128 samples per cycle; 20 pre-fault cycles; up to 30 seconds of continuous recording at a rate of 32 samples per cycle , Specifications'are subject'to change without notice. Copyright © 2011-2015 SATEC Ltd.

'owerful Solutions ““m. I PM175 * EN50160, GOST13109 or GOST54149 Power Quality recorder (compliance statistics, EN50160 harmonics survey statistics, onboard power quality analyzer; programmable thresholds and hysteresis; ready-for-use reports) * Real-time waveform capture and monitoring; simultaneous 6-channel 4-cycle capture at 128 samples per cycle * Detachable display module with a 3-wire RS-485 interface; up to 1000 meters operation. Selection of one or two displays: * Easy to read 3-row (2x4 characters + 1x6 characters) bright LED display, adjustable update time, auto-scroll option...

PM175 Technical Specifications ENVIRONMENTAL CONDITIONS Operating temp. -20°C to +60°C (-4°F to 140°F) Storage temperature -25°C to +80°C (-13°F to 176°F) Humidity 0 to 95% RH non-condensing MATERIALS Case enclosure Plastic PC/ABS blend Display body Plastic PC/ABS blend Front panel Plastic PC Plug-in connectors Polyamide PA6.6 (UL94-V0) Packaging case Carton and Stratocell® (Polyethylene Foam) brackets Labels Polyester film (UL94-V0) POWER SUPPLY 120/230 VAC-110/220 * Rated input 85-264VAC 50/60 Hz, VDC Option 88-290VDC, Burden 10W * Isolation * Input to output:...

'owerful Solutions ““m. I PM175 Ranges (upon order) OPTIONAL ANALOG OUTPUTS 2 Analog Outputs (optically isolated) * 0-20 mA, maximum load 510 Q * 4-20 mA, maximum load 510 Q * ±1 mA, maximum load 5 kQ (100% overload) * 0-1 mA, maximum load 5 k Q (100% overload) * ±5 mA, maximum load 5 kQ * 0-5 mA, maximum load 5 kQ 2,000 V RMS modem * Connector type: RJ11 * Supported protocols: Modbus RTU and Modbus ASCII COM2 RS-422/RS-485 optically isolated port Isolation 2,000 V RMS Connector type Removable, 5 pins Wire size Up to 14 AWG (up to 1.5 mm2). Power supply Internal Baud rate...

Accuracy Class 0.2S according to IEC 62053-22 (1A/5A versions) UL File no. E236895 Directive complied with:  EMC: 89/336/EEC as amended by 92/31/EEC and 93/68/EEC  LVD: 72/23/EEC as amended by 93/68/EEC and 93/465/EEC Harmonized standards to which conformity is declared: EN55011: 1991  EN50082-1: 1992  EN61010-1: 1993  A2/1995  Specifications are subject to change without notice. Copyright © 2011-2015 S

PM175 Order String MODELS PM175 Power Quality Analyzer PM175 with 5.7" touchscreen graphic color display Transducer version VOLTAGE INPUTS 690V AC Nominal Voltage Input 120V AC Nominal Voltage Input CURRENT INPUTS 5 Ampere 1 Ampere 5A split core remote high accuracy current sensor (HACS) High Accuracy Current Sensors (HACS). Requires ordering of 3 HACS CALIBRATION AT FREQUENCY 50 Hz 60 Hz POWER SUPPLY 85-265V AC and 88-290V DC 9.6-19V DC 19-37V DC 37-72V DC I/O MODULE 2 Digital Input /2 Digital Output (standard) Additional 2 Digital Input /2 Digital Output (total 4DI/4DO) 2 Analog Outputs:...