EM132 Datasheet
5Pages

{{requestButtons}}

Catalog excerpts

EM132 Datasheet - 1

SATEC 'owerful Solutions EM132 MULTI-FUNCTION TRANSDUCER Muirif UNcnoM transducer SATEC EM132 is a Smart DIN Rail Multi-Function Transducer with a local display. It is based on SATEC's best seller PM130 PLUS with an off-the-shelf LCD display (similar to the BFM136 display). The EM132 provides the full functionality of the PM130P PLUS combined with energy measurement and battery backup for the real time clock. The EM132 is fully compatible with all PM130 PLUS modules. The EM132 can serve any application from residential energy metering, through industrial energy and harmonic analysis through utility comprehensive substation automation. It provides multi-functional 3-phase power metering, revenue metering and basic power quality information. The EM132 features an internal real time clock (RTC), battery backup and onboard non-volatile memory for event and data logging. The device includes 16 set points and 4 counters that operate various analog and digital I/O add-ons. The EM132 offers wide range of network configurations and versatile voltage and current connections: 57 to 400V AC, up to 100A direct current measurement, connection of standard CTs (1A, 5A) and a wide range of remote CTs (split or solid cores). Multi-functional 3-Phase Transducer * True RMS, volts, amps, power, power factor, neutral current, voltage and current unbalance, frequency * Ampere/Volt demand meter * 25, 50, 60 and 400 Hz measurements * 128 samples per cycle Main Features Energy Meter * Accuracy Class 0.5S * Four-quadrant active and reactive energy poly-phase static meter * Three-phase total and per phase energy measurements; active, reactive and apparent energy counters * Automatic daily energy and maximum demand profile log for total and tariff registers

Open the catalog to page 1
EM132 Datasheet - 2

SATEC 'owerful Solutions EM132 Harmonic Analyzer * Voltage and current THD, TDD and K-Factor Real-time Waveform Capture (via PC) * Real-time "scope mode" waveform monitoring capability * Simultaneous 6-channel 8-cycle waveform capture at a rate of 64 samples per cycle Programmable Logical Controller * Embedded programmable controller * 16 control set points; programmable thresholds and delays * Relay output control * 1-cycle response time Event and Data Recording * Non-volatile memory for long-term event and data recording for at least 90 days history storage capabilities * Event recorder...

Open the catalog to page 2
EM132 Datasheet - 3

SATEC 'owerful Solutions EM132 Specifications VOLTAGE INPUTS Voltage Connections 3 phases, 1 Neutral Voltage Ratings Direct voltage connection: * 220 to 400V (L-N) * 380 to 690V (L-L) * Range 0-800VAC Via PT (Power Transformer): * 57.7 to 120V (L-N) * 100 to 207V (L-L) * Range 0-250VAC Starting Voltage 0.2% UN Input Impedance > 1MQ Power supply Overload withstand 4000 VAC (L-G) for 1 min. Impulse Voltage 6kV 2.5 to 4 mm2 CURRENT INPUTS Current Connections 3 galvanic isolated inputs Current Ratings Choice of 4 options: * ../5A CT connection * ../1A CT connection * Direct up...

Open the catalog to page 3
EM132 Datasheet - 4

Standards Compliance specifications EMC per IEC 60688 and IEC 62052-11: Atmospheric Environment IEC61000-4-2: Electrostatic discharge, 15/– air/contact IEC61000-4-3: Electromagnetic RF Fields, 10V/m @ 80Mhz – 1000MHz IEC61000-4-4: Fast Transients burst, 4KV on current and voltage circuits and 2 KV for auxiliary circuits IEC61000-4-5: Surge 4KV on current and voltage circuits and 1 KV for auxiliary circuits IEC61000-4-6: Conducted Radio-frequency, 10V @ 0.15Mhz – 80MHz IEC61000-4-8: Power Frequency Magnetic Field EN55022: 2010 Class A (CISPR 22) FCC p.15 Class A mandatory IEC 62052-11:...

Open the catalog to page 4
EM132 Datasheet - 5

EM132 Order String OPTIONS Current Inputs 5 Ampere 1 Ampere Direct current measurement up to 100A High Accuracy Current Sensors (HACS). Requires ordering of 3 HACS - please refer to SATEC’s HACS Datasheet. Calibration at Frequency 25 Hz 50 Hz 60 Hz 400 Hz Resolution Low Resolution 1A, 1V High Resolution 0.01A, 0.1V Power Supply 40-300V AC/DC Communication Protocol Modbus and DNP 3.0 Modbus and IEC 60870-101/104 Expansion Module (Max. 1 module per instrument, can be ordered separately) Analog Output: ±1mA Analog Output: 0-20mA Analog Output: 0-1mA Analog Output: 4-20mA Analog Output: 0-3mA...

Open the catalog to page 5

All SATEC catalogs and technical brochures

  1. PM180 Brochure

    16 Pages

  2. ezPAC Brochure

    12 Pages

  3. PM175 Flyer

    1 Pages

  4. PM172E Specs

    3 Pages

Archived catalogs

  1. PM175 Specs

    4 Pages