BILLING & REVENUE METERING
36Pages

BILLING & REVENUE METERING SMART SYSTEMS

Time of Use (TOU) Billing Systems Value Proposition Energy distribution and tenant billing allows up to 40% markup and fast return on investment (ROI) with an effective technofinancial solution. SATEC Automatic Meter Reading (AMR) system includes various energy meters, bi-directional communication and comprehensive software for remote management, online control and billing. Additional profit center Space and cost savings Automatic Operation Energy Saving Complete outsourced service Shopping Centers & Malls Commercial Buildings Public Buildings Hi-Tec & Industrial Facilities Universities &...

SATEC was established in 1987 and recently after introduced a multi-function digital electricity meter, which was a new concept at that time. Today the company is a world leader in the field of energy management, power quality monitoring and substation automation with offices in the USA, Israel, Spain, Russia, India, Singapore, Japan, China and Australia. In addition, SATEC solutions are promoted in over 60 countries via over 100 business partners. In 2006 SATEC established the Billing department, which is dedicated to energy distribution and billing. The company provides energy billing...

System Configuration Air-Conditioning Meters SATEC Meters Modbus / M-BUS (via converter) ETC-II Water / Gas Meters Concentrator Cellular Provider Gateway Digital Pulse / 4-20mA GPRS Site Internet Gateway

End User / Owner / Facility Manager Printed Utility Bills INTERNET Phone & email Service eXpertPower™ Service System Operator Automatic Bill Data Retrieval BMS / SCADA / Management System Utility Vault Accounting Software

Space and Cost Saving A multi channel meter saves up to 75% space compared with separated meters and leaves more space for revenues. Advanced Billing Services with ExpertPower™ System SATEC provides advanced billing services using ExpertPower™ system for Automatic Meter Reading (AMR) of various energy meters (electricity, air conditioning, water, gas, fuel, steam, PV and more). The billing service starts with project management and consultance, followed by supply and installation of meters and communication devices, and finally periodical billing service. The periodical service includes:...

Same Billing as the Utility Tracking of Energy Expenses Consumers are charged exactly as they would be charged by the utility (in case that tariffs are regulated). Monitoring the system allows for continuous tracking of energy expenses, enabling cost reduction and accurate investment planning. Charging Actual Consumption Charging according to the actual consumption is the only fair choice. Charging per floor area is unfair and may cause some consumers to be unnecessarily charged for other consumers' actual consumption. Accuracy SATEC meters are up to 10 times more accurate than utility...

SATEC's Branch Feeder Monitor™ (BFM) products provide energy management for multi-point power solutions. The BFM product line includes the well established BFM136, with an install base of over a million channels, and the modular BFM-II. See next page for the differences. Ideal for both new and retrofit projects, the BFMs automatically provide metering, demand and energy readings, logging and multi-tariff (TOU) data. The BFM-II monitors up to 18 three-phase circuits, 54 single-phase circuits, or any combination of single or three-phase circuits. This flexibility makes the BFM-II perfect...

9 OR 18 DIGITAL INPUTS □ Optically isolated input, dry contact sensing (voltage-free) □ Internal power supply 5V DC □ Sensitivity: Open @ input resistance >16kOhm, Closed @ input resistance <10kOhm □ Scan time: Icycle. □ Withstanding insulation: 4kV AC @ 1min □ Wire: 28-16 AWG (0.1-1.5 mm2), 600V isolation □ Terminal pitch: 3.81 mm 4 ANALOG INPUTS □Ranges (upon order): □ ±1 mA (100% overload) □ 0-20 mA □4-20 mA □ 0-1 mA (100% overload) □ Accuracy: 0.5% FS □Scan time: 2 cycles □Withstanding Insulation: 4kV AC @ 1min □ Wire: 28-16 AWG (0.1-1.5 mm2), 600V isolation □Terminal pitch: 5 mm RELAY...

Multi-Function Transducer TOU Smart Energy Meter The EM132 is a cost-effective multi-function transducer with local display, designed to replace analog or digital transducers. Its local display allows setup and verification of installation, without the hassle of using computers. One device supports all network configurations (i.e., 3 wire, 4 wire, wye, delta, etc.) and is field configurable. The unique field installable add-on feature allows adding digital and analog I/Os. When using the 4 analog output add-on, the EM132 can replace 4 analog 4-20mA transducers. Each one can be...

Multi-Functional Power Meter Models PM130 PLUS Extra bright 7-segment LEDs, 3 lines of 4-5 digits plus unique bar graph loading indicator PM135 3.5" backlit LCD plus unique bar graph loading indicator The PM130/135 are multi-functional 3-phase power meters with basic revenue metering, power quality and harmonics analysis. The PM130/135 are widely integrated in panel boards and SCADA systems, with integral RS-485 communication port and a wide range of protocols, such as Modbus, DNP 3.0 and IEC 60870. With the addition of the unique TOU module, the EH model answers the needs of revenue...

Plug-in Module The 13X modular approach enables users to assemble a system that meets their specific needs. Pass-Thru CTs Dimensions (HxWxD): Small form: 2.8x1.8x13" / 72x46x34 mm Large form: 3.7x3x17" / 95x77x45 mm The wide choice of plug-in modules includes: 2nd Comm. port Small form One of the following: □ Ethernet (TCP/IP) □ PROFIBUS □ RS-232/422/485 □Cellular Modem □ CANopen (CAN Bus) □ RF * * Module & accessories available in certain regions only Analog Outputs Small form 4 analog outputs, selection of ranges upon order: □ ±1mA □ 0-20mA □ 0-1mA □4-20mA □ 0-3mA □ ±3mA □ 0-5mA □ ±5mA...

The Advanced Power Quality Analyzers PM174/5 are compact, multi-functional three-phase power and revenue meters equipped with advanced power quality analysis capabilities. The analyzers have been developed to answer the needs of a wide range of users: substation operators, electrical energy system integrators, generator users, industrial and commercial energy consumers. These analyzers cover the entire range of applications demanding high performance power quality monitoring and root cause analysis. The PM174 provides the full range of power quality monitoring, logging and...