Spray Guns I Cup Systems I Breathing Protection I Air Filtration I Accessories Versatile dry-blowing system

SATA dry jet – improved efficiency when curing waterborne paints Due to tightened environmental requirements, bodyshops increasingly apply waterborne paints. Due to their physical properties, the curing of waterborne materials takes longer when compared to solvent-borne. Consequently, longer cycle times diminish the productivity of the bodyshops. The SATA dry jet significantly reduces drying times and cycle times when applying environmentally friendly waterborne paints. The SATA dry jet utilises the Venturi principle: In addition Purchasing a SATA dry jet pays back within a short to the compressed...

Ideal for smaller areas: Costly and long heating of the spray boothes becomes unnecessary. Larger surface efficiency when using up to 4 blow guns on a stand. SATA dry jet stand / stand jumbo Flexible positioning of the stand and the blow guns provides perfect conditions for targeted drying. For fixed use, two different stands with adjustable height are available. Up to four SATA dry jet guns can be mounted on these stands and be operated at the same time (details on the rear side). Each individual blow gun can be targeted to the painted object. Once, the air supply has been activated, the system...

Versions and article numbers: SATA dry jet blow gun Air consumption 270 Nl/min at 2.5 bar Art. No. 82222 SATA - leader for the application of waterborne paints  SATAjet plication of both solvent-based and waterborne even material flow and reduces the cleaning efforts to a minimum - especially with waterborne paints, this is a big advantage.  SATA filter 484: The triple-stage compressed air filter eliminates even the finest oil vapours - this Accessories Pack of 3 fine-meshed, corrosion-free sieve Extension by one blow gun for SATA dry jet stand (enlargement by 40 cm) Height extensions by approx....