Technical Details Dimensions (b x h x d) Relative breathing air humidity* (approx.) Breathing air temperature** (approx.) Recommended operating pressure Max. allowed operating pressure after AB1 regulation valve Recommended operating pressure Water filling quantity Electrical connection Heating power Depending on air inlet pressure and heating temperature With heating switched on (depending on insulation/length of tubes and heating temperature) SATA® AB1™ - Wall Mounted Breathing Air Humidifier and Air Warmer Supplies up to five breathing protection hoods. We recommend breathing protection equipment with Accessories: SATA® vision 2000™ Safety compressed air hose A full face breathing protection mask To supply breathing protection to protect respiratory tracts, face, equipment, crush- and kink- hair and neck - for daily use. SATA® Industrial belt unit Belt unit for the use of SATA vision 2000 Portable breathing air humidifier for sin- or SATA air star C with activated charcoal gle workplaces where the installation of filter elements or with SATA AB1. the SATA AB1 would not make sense. Additional practical accessories like air hoses, respirators, compressed air filters etc. are available from your SATA dealer. Your SATA dealer SATA GmbH & Co. KG Domertalstr. 20 70806 Kornwestheim Germany Tel. +49 7154 811-200 Fax +49 7154 811-194 E-Mail: [email protected] www.sata.com Errors and technical alterations reserved - SATA, SATAjet and/or other SATA products referenced herein are either registered trademarks or trademarks of SATA GmbH & Co. KG in the U.S. and/or other countries. belt unit without additional filter element wh

Spray Guns | Cup Systems | Breathing Protection | Filter Technology | Accessories Technical Documentation

SATA AB1 Breathing Air Humidifier and Air Warmer The application of paint and other hazardous material requires health protection through air supplied breathing protection equipment. However, full face breathing masks are often seen as an unwelcome necessity, due to undesirable secondary effects of modern compressed air systems and refrigerant dryers: The compressed air reaching the breathing mask is too dry and cold. As a result, painters feel uncomfortable and are unhappy wearing full face masks. Furthermore, the mucous membranes in mouth and nose dry out, leading to respiratory issues. The...

Technical components Main switch with electrical energy. Therefore, the SATA AB1 has to be installed outside the spray booth (explosion Thermostat The required air temperature is adjusted via a thermostat. The SATA AB1 automatically controls the heating temperature. Features The SATA AB1 first filters, then humidifies and warms compressed air while it streams through hot water. The temperature can be infinitely variably regulated between 20° C and 25° C. A bypass switch allows to top up the SATA AB1 with demineralised water also while in Pressure adjustment use, to avoid work interruptions. The...